Flange, Fitting, Pipe & Gasket Dimensional Standards
101 dimension, weight and rating charts for flanges — including plate and blind flanges in every standard — butt weld and forged fittings, line blanks, valves, branch outlets, pipes, gaskets, stud bolts, plates and structural steel: ASME B16.5, B16.47, B16.48, B16.36, B16.9, B16.10, B16.11, B16.20, EN 1092-1 (PN6–PN100), IS 6392, IS 9523, IS 1538, BS 10, AS 2129, JIS B2220, AWWA C207, MSS SP-44, SP-43, SP-75, SP-83, SP-95, SP-97, EN 10253 / DIN, IS 1239, B36.10M and IS 808. Read each chart online or download it as a PDF.
All values are nominal and provided for convenience. Always verify critical dimensions against the latest edition of the governing standard before ordering or fabrication.
Free app
Teshi PipeData — every pipe, flange and fitting dimension
Find any item step by step — product, type, standard, rating, size — and get its drawing, dimensions, weight and purchase description. Over 7,500 items to ASME, EN, IS, BS, JIS and AWWA, in mm and inches. Free, works offline on your phone.
Open PipeDataDimension finder — any size, any standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Download the complete books
Every chart below, bound as printable A4 portrait books with a clickable index — tap any line in the contents to jump straight to that table.
Flange & fitting dimensions and weights (kg)
Every flange and fitting size with its weight in kg — ASME, EN, IS, BS, AS, JIS, AWWA, MSS.
Download PDFReference book · PDFComplete Piping Dimension Catalogue
Pipes, flanges, fittings, olets, bolting, gaskets, plates and structurals, P-T ratings, alloy chemistry and mechanicals · A4 book · 194 pages
DownloadReference book · PDFComplete Flange Dimensions
ASME B16.5 / B16.47 / B16.36, EN 1092-1 PN6–PN100, IS 6392, IS 1538, BS 10, AS 2129, JIS B2220, AWWA C207, MSS SP-44, P-T ratings, studs and gaskets · A4 book · 111 pages
DownloadReference book · PDFComplete Fitting Dimensions
ASME B16.9 and EN 10253 / DIN butt weld fittings; MSS SP-43, SP-75, SP-83, SP-95, SP-97; B16.11 and IS 1239 SW / threaded; NPT; pipe schedules · A4 book · 62 pages
DownloadFlanges
ASME B16.5 Plate Flange & Blind Flange Dimensions
ASME B16.5 plate flange and blind flange dimensions, Class 150 to 1500: OD, bore, RF/FF thickness, PCD, holes and raised face in mm.
View online · PDFASME B16.47ASME B16.47 Large Diameter Plate & Blind Flange Dimensions
ASME B16.47 Series A and B large-diameter plate and blind flange dimensions, NPS 26–60 (650–1500 NB), Class 150 and 300, in mm.
View online · PDFEN 1092-1EN 1092-1 Plate Flange (Type 01) & Blind Flange (Type 05) Dimensions
EN 1092-1 Type 01 plate flange and Type 05 blind flange dimensions, PN 6, 10, 16 and 40: OD, bore and thickness in mm.
View online · PDFIS 6392IS 6392 Plate Flange & Blind Flange Dimensions
IS 6392 plate flange and blind flange dimensions, PN 2.5 to PN 160: outside diameter, bore and thickness in mm, all tables.
View online · PDFIS 9523IS 9523 Flange Dimensions — Plate & Blind, PN 10 to PN 40
IS 9523 flange dimensions, PN 10, 16, 25 and 40: OD, PCD, holes, raised face, bore and plate/blind thickness in mm.
View online · PDFBS 10BS 10 Plate Flange & Blind Flange Dimensions (Tables D, E, F, H)
BS 10 Table D, E, F and H plate flange and blind flange dimensions: OD, bore, RF/FF thickness and drilling in mm.
View online · PDFAWWA C207AWWA C207 Ring (Plate) Flange & Blind Flange Dimensions
AWWA C207 Class B, D, E and F ring (plate) flange and blind flange dimensions, 100–3600 NB: OD, bore and thickness in mm.
View online · PDFASME B16.5ASME B16.5 Class 150 flange dimensions
Class 150 weld neck, slip-on, blind, socket weld, threaded and lap joint flange dimensions, NPS ½–24, in mm.
View online · PDFASME B16.5ASME B16.5 Class 300 flange dimensions
Class 300 flange outside diameter, thickness, hub and drilling dimensions, NPS ½–24, in mm.
View online · PDFASME B16.5ASME B16.5 Class 600 flange dimensions
Class 600 flange dimensions and bolting, NPS ½–24, in mm.
View online · PDFASME B16.5ASME B16.5 Class 900 flange dimensions
Class 900 flange dimensions and bolting, NPS ½–24, in mm.
View online · PDFASME B16.5ASME B16.5 Class 1500 flange dimensions
Class 1500 flange dimensions and bolting, NPS ½–24, in mm.
View online · PDFASME B16.5ASME B16.5 Class 2500 flange dimensions
Class 2500 flange dimensions and bolting, NPS ½–12, in mm.
View online · PDFASME B16.47ASME B16.47 Series A flange dimensions
Large-diameter Series A (MSS SP-44) flanges, Class 150, 300 and 600, NPS 26–60.
View online · PDFASME B16.47ASME B16.47 Series B flange dimensions
Large-diameter Series B (API 605) flanges, Class 150 and 300, NPS 26–60.
View online · PDFASME B16.36ASME B16.36 orifice flange dimensions
Class 300 and 600 weld neck orifice flange dimensions, NPS 1–24, with pressure-tap details, in mm.
View online · PDFASME B16.5ASME B16.5 flange facing dimensions
Raised face height by class and raised face diameter, NPS ½–24, with ring-joint links.
View online · PDFEN 1092-1EN 1092-1 PN10 flange dimensions
PN10 weld neck, slip-on, plate and blind flange drilling, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN16 flange dimensions
PN16 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN25 flange dimensions
PN25 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN40 flange dimensions
PN40 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDFASME B16.5ASME B16.5 flange weight chart
Approximate weights of weld neck, slip-on and blind flanges by class and size, in kg.
View online · PDFASME B16.5ASME B16.5 pressure–temperature ratings
Flange working pressure by class and temperature for carbon, alloy and stainless steel material groups, in bar.
View online · PDFIS 6392IS 6392 PN 2.5 flange dimensions
IS 6392 PN 2.5 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 6 flange dimensions
IS 6392 PN 6 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 10 flange dimensions
IS 6392 PN 10 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 16 flange dimensions
IS 6392 PN 16 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 25 flange dimensions
IS 6392 PN 25 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 40 flange dimensions
IS 6392 PN 40 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 64 flange dimensions
IS 6392 PN 64 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 6392IS 6392 PN 100 flange dimensions
IS 6392 PN 100 plate (slip-on), weld neck and blind flange dimensions in mm: OD, thickness, raised face, PCD and bolting.
View online · PDFIS 1538IS 1538 flange dimensions (Cast Iron Fittings)
IS 1538 cast iron fitting flange dimensions DN 80–1500: OD, thickness, raised flange, PCD and drilling, plus double-flanged 90° bends, in mm.
View online · PDFBS 10BS 10 Table D flange dimensions
BS 10 Table D flange dimensions (low pressure (about 100 psi cold)): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table E flange dimensions
BS 10 Table E flange dimensions (about 200 psi cold): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table F flange dimensions
BS 10 Table F flange dimensions (about 300 psi cold): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table H flange dimensions
BS 10 Table H flange dimensions (about 400 psi cold): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table J flange dimensions
BS 10 Table J flange dimensions (about 600 psi cold): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table K flange dimensions
BS 10 Table K flange dimensions (about 900 psi cold): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table R flange dimensions
BS 10 Table R flange dimensions (steam, about 1000 psi): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table S flange dimensions
BS 10 Table S flange dimensions (steam, about 1200 psi): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFBS 10BS 10 Table T flange dimensions
BS 10 Table T flange dimensions (steam, about 1500 psi): OD, thickness, PCD, holes and bolts, in inches and mm.
View online · PDFAS 2129AS 2129 Table D flange dimensions
AS 2129 Table D flange dimensions DN 15–600 in mm: OD, minimum thickness by material, PCD, holes and bolts.
View online · PDFAS 2129AS 2129 Table E flange dimensions
AS 2129 Table E flange dimensions DN 15–600 in mm: OD, minimum thickness by material, PCD, holes and bolts.
View online · PDFAS 2129AS 2129 Table F flange dimensions
AS 2129 Table F flange dimensions DN 15–600 in mm: OD, minimum thickness by material, PCD, holes and bolts.
View online · PDFAS 2129AS 2129 Table H flange dimensions
AS 2129 Table H flange dimensions DN 15–600 in mm: OD, minimum thickness by material, PCD, holes and bolts.
View online · PDFJIS B2220JIS B2220 5K flange dimensions
JIS B2220 5K steel flange dimensions in mm: OD, thickness, raised face, PCD, bolt holes and bolt size.
View online · PDFJIS B2220JIS B2220 10K flange dimensions
JIS B2220 10K steel flange dimensions in mm: OD, thickness, raised face, PCD, bolt holes and bolt size.
View online · PDFJIS B2220JIS B2220 16K flange dimensions
JIS B2220 16K steel flange dimensions in mm: OD, thickness, raised face, PCD, bolt holes and bolt size.
View online · PDFJIS B2220JIS B2220 20K flange dimensions
JIS B2220 20K steel flange dimensions in mm: OD, thickness, raised face, PCD, bolt holes and bolt size.
View online · PDFJIS B2220JIS B2220 30K flange dimensions
JIS B2220 30K steel flange dimensions in mm: OD, thickness, raised face, PCD, bolt holes and bolt size.
View online · PDFAWWA C207AWWA C207 Class B flange dimensions
AWWA C207 Class B (86 psi) steel ring flange dimensions in inches: OD, bolt circle, holes, bolts and thickness.
View online · PDFAWWA C207AWWA C207 Class D flange dimensions
AWWA C207 Class D (175 psi (4–12 in) / 150 psi (over 12 in)) steel ring and hub flange dimensions in inches: OD, bolt circle, holes, bolts and thickness.
View online · PDFAWWA C207AWWA C207 Class E flange dimensions
AWWA C207 Class E (275 psi) steel ring and hub flange dimensions in inches: OD, bolt circle, holes, bolts and thickness.
View online · PDFAWWA C207AWWA C207 Class F flange dimensions
AWWA C207 Class F (300 psi) steel ring flange dimensions in inches: OD, bolt circle, holes, bolts and thickness.
View online · PDFEN 1092-1EN 1092-1 PN6 flange dimensions
EN 1092-1 PN6 flange dimensions in mm: OD, bolt circle, holes, bolts, thickness by flange type and raised face.
View online · PDFEN 1092-1EN 1092-1 PN63 flange dimensions
EN 1092-1 PN63 flange dimensions in mm: OD, bolt circle, holes, bolts, thickness by flange type and raised face.
View online · PDFEN 1092-1EN 1092-1 PN100 flange dimensions
EN 1092-1 PN100 flange dimensions in mm: OD, bolt circle, holes, bolts, thickness by flange type and raised face.
View online · PDFMSS SP-44MSS SP-44 Class 150 flange dimensions
MSS SP-44 Class 150 steel pipeline flange dimensions NPS 12–60 in inches: OD, thickness, hub, raised face, bolt circle and bolting.
View online · PDFMSS SP-44MSS SP-44 Class 300 flange dimensions
MSS SP-44 Class 300 steel pipeline flange dimensions NPS 12–60 in inches: OD, thickness, hub, raised face, bolt circle and bolting.
View online · PDFMSS SP-44MSS SP-44 Class 400 flange dimensions
MSS SP-44 Class 400 steel pipeline flange dimensions NPS 12–60 in inches: OD, thickness, hub, raised face, bolt circle and bolting.
View online · PDFMSS SP-44MSS SP-44 Class 600 flange dimensions
MSS SP-44 Class 600 steel pipeline flange dimensions NPS 12–60 in inches: OD, thickness, hub, raised face, bolt circle and bolting.
View online · PDFMSS SP-44MSS SP-44 Class 900 flange dimensions
MSS SP-44 Class 900 steel pipeline flange dimensions NPS 12–60 in inches: OD, thickness, hub, raised face, bolt circle and bolting.
View online · PDFLine blanks
ASME B16.48 Spectacle Blind Dimensions (Figure-8)
ASME B16.48 spectacle blind (figure-8 blank) dimensions for Class 150, 300 and 600 RF: OD, ID, centre line, thickness and web width in mm.
View online · PDFASME B16.48ASME B16.48 Spade & Ring Spacer Dimensions
ASME B16.48 spade (paddle blank) and ring spacer dimensions, Class 150: OD, spacer ID, centre to handle end, thickness and handle width in mm.
View online · PDFButt weld fittings
ASME B16.9 elbow dimensions
Centre-to-end dimensions of 90° and 45° long-radius, short-radius and 3D elbows and 180° returns, NPS ½–48.
View online · PDFASME B16.9ASME B16.9 tee dimensions
Centre-to-end dimensions of straight and reducing butt weld tees, NPS ½–48.
View online · PDFASME B16.9ASME B16.9 reducer dimensions
End-to-end length of concentric and eccentric butt weld reducers, NPS ¾–48.
View online · PDFASME B16.9ASME B16.9 pipe cap dimensions
Length of butt weld pipe caps and limiting wall thickness, NPS ½–48.
View online · PDFASME B16.9ASME B16.9 stub end dimensions
Lap joint stub end length, lap diameter and fillet radius, NPS ½–24.
View online · PDFEN 10253-2EN 10253 / DIN 2605 Elbow dimensions
EN 10253-2 (DIN 2605) butt-weld 90° and 180° elbow dimensions, type 2D, 3D and 5D, by DN and OD, in mm.
View online · PDFEN 10253-2EN 10253 / DIN 2615 Tee dimensions
EN 10253-2 (DIN 2615) equal tee centre-to-end dimensions by DN and OD, in mm.
View online · PDFEN 10253-2EN 10253 / DIN 2616 Reducer dimensions
EN 10253-2 (DIN 2616) concentric and eccentric reducer lengths by large and small DN / OD, in mm.
View online · PDFEN 10253-2EN 10253 / DIN 2617 Cap dimensions
EN 10253-2 (DIN 2617) butt-weld cap heights by DN and OD, in mm.
View online · PDFMSS SP-43MSS SP-43 Stub End dimensions
MSS SP-43 short-pattern lap-joint stub end dimensions, Sch 10S, NPS ½–24, in mm.
View online · PDFMSS SP-75MSS SP-75 High-Test Fitting dimensions
MSS SP-75 WPHY high-test butt-weld elbow, tee, reducer and cap dimensions, NPS 16–60, in mm.
View online · PDFASME B16.9ASME B16.9 Butt Weld Elbow Weight Chart (kg)
ASME B16.9 butt weld elbow weight chart: 90° long and short radius elbow weight in kg for SCH 10S, 20, STD, 40, XS and 80, NPS ½ to 48.
View online · PDFASME B16.9ASME B16.9 Equal Tee Weight Chart (kg)
ASME B16.9 equal tee weight chart in kg for SCH 10S, 20, STD, 40, XS and 80, NPS ½ to 48, with packing volume.
View online · PDFASME B16.9ASME B16.9 Reducer Weight Chart (kg)
ASME B16.9 concentric and eccentric reducer weight chart in kg by large-end size and schedule, SCH 10S to SCH 80.
View online · PDFASME B16.9ASME B16.9 Pipe Cap Weight Chart (kg)
ASME B16.9 butt weld pipe cap weight chart in kg for SCH 10S, 20, STD, 40, XS and 80, NPS ½ to 48.
View online · PDFASME B16.9 / MSS SP-43Lap Joint Stub End Weight Chart (kg)
Lap joint stub end weight chart in kg for SCH 10S, 20, STD, 40, XS and 80, ASME B16.9 / MSS SP-43.
View online · PDFForged fittings
ASME B16.11 socket weld fitting dimensions
Socket weld elbow, tee, cross, coupling and cap dimensions, Class 3000, 6000 and 9000.
View online · PDFASME B16.11ASME B16.11 threaded fitting dimensions
Threaded elbow, tee, cross, coupling, cap and plug dimensions, Class 2000, 3000 and 6000.
View online · PDFASME B1.20.1NPT thread dimensions (ASME B1.20.1)
Threads per inch, pitch, engagement lengths and pitch diameters of NPT taper pipe threads.
View online · PDFMSS SP-97MSS SP-97 Weldolet dimensions
Standard-weight Weldolet height, base width and outlet diameter, NPS ½–8, in mm.
View online · PDFMSS SP-83MSS SP-83 Union dimensions
MSS SP-83 Class 3000 threaded union dimensions, NPS ⅛–3, in mm.
View online · PDFMSS SP-95MSS SP-95 Swage Nipple & Bull Plug dimensions
MSS SP-95 concentric and eccentric swage nipple and bull plug lengths, NPS ¼–4, in inches.
View online · PDFIS 1239-2IS 1239 Part 2 Steel Pipe Fitting dimensions
IS 1239 Part 2 mild steel screwed pipe fittings: sockets, elbows, tees, bends, return bends and nipples, in mm.
View online · PDFASME B16.11ASME B16.11 Socket Weld Fitting Weight Chart (kg)
ASME B16.11 socket weld fitting weight chart: elbow, tee, cross, coupling and cap weights in kg for Class 3000, 6000 and 9000.
View online · PDFPipes
Pipe schedule chart — ASME B36.10M
Carbon and alloy steel pipe outside diameter, wall thickness and weight by schedule, NPS ⅛–48.
View online · PDFASME B36.19MStainless steel pipe schedule chart — ASME B36.19M
Stainless steel pipe wall thickness and weight for schedules 5S, 10S, 40S and 80S.
View online · PDFIS 1239 (Part 1)IS 1239 Pipe Dimensions — Light, Medium & Heavy (Class A, B, C)
IS 1239 Part 1 steel tube dimensions: outside diameter and wall thickness for Light (A), Medium (B) and Heavy (C) class, 15–150 NB, in mm.
View online · PDFGaskets
ASME B16.20 spiral wound gasket dimensions
Sealing element and centering ring diameters of spiral wound gaskets for ASME B16.5 flanges.
View online · PDFASME B16.20ASME B16.20 ring joint gasket dimensions
Type R oval and octagonal ring numbers, pitch diameter, width and height, with flange size by class.
View online · PDFASME B16.21ASME B16.21 non-metallic gasket dimensions
Flat ring gasket inside and outside diameters for Class 150, 300 and 600 raised-face flanges.
View online · PDFPlates & structurals
Steel plate weight chart
Weight of mild steel plate per square metre and per standard sheet, 3 mm to 100 mm thick.
View online · PDFIS 808ISMB beam sizes and weights (IS 808)
Depth, flange width, web and flange thickness and mass per metre of ISMB 100 to ISMB 600.
View online · PDFIS 808ISMC channel sizes and weights (IS 808)
Depth, flange width, thicknesses and mass per metre of ISMC 75 to ISMC 400.
View online · PDFIS 808ISA angle sizes and weights (IS 808)
Leg size, thickness and mass per metre of equal and unequal steel angles.
View online · PDFReference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions. Charts and data sheets are © Teshi Group and may be downloaded and printed for use on your own enquiries and projects; reproduction or republication by other suppliers is not permitted.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.