IS 6392 PN 10 Flange Dimensions

IS 6392 PN 10 Flange Dimensions — tables

PN 10 (Table 11) — plate flanges for welding (slip-on plate)

PN 10 (Table 10 weld-neck + Table 14 blind) — thickness, neck and drilling

Notes

• All dimensions are in millimetres.
• The PN 10 tables start at DN 200; for DN 10–175 IS 6392 refers to the PN 16 dimensions.
• IS 6392 drilling follows the ISO/DIN metric series, so IS 6392 flanges generally mate with EN 1092-1 / DIN flanges of the same PN — check the raised face and thickness for your flange type.
• Values are nominal, compiled from published copies of the standard; blank cells (—) are values not confirmed from the sources available. Verify against the current edition before design, purchase or fabrication.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

IS 6392 PN 10 Flange Dimensions — size by size

Every size has its own page with a drawing, mm and inch values and a one-size PDF.

Teshi Group manufactures flanges and fittings to all of these standards on request, including Chinese GB / HG / SH and European EN dimensions for export projects. Always confirm bolting, facing and thickness when substituting one standard for another.

Related products, data sheets and standards