DN 800 IS 6392 PN 10 Flange Dimensions
DN 800 (32") to IS 6392: pipe OD 812.8 mm; OD 1015 mm; thickness 52 mm; raised face 905 mm; RF height 5 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- N
- Neck / hub diameter at base
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 800 IS 6392 PN 10 Flange Dimensions — all dimensions
PN 10 (Table 11) — plate flanges for welding (slip-on plate)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 812.8 mm | 32.00 in |
| Flange OD — D | 1015 mm | 39.96 in |
| Flange — C | 52 mm | 2.05 in |
| Raised face — d1 | 905 mm | 35.63 in |
| RF height — f | 5 mm | 0.197 in |
| Bolt circle — K | 950 mm | 37.40 in |
| Number of bolts | 24 | |
| Hole dia — L | 33 mm | 1.30 in |
| Bolt size | M30 |
PN 10 (Table 10 weld-neck + Table 14 blind) — thickness, neck and drilling
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 812.8 mm | 32.00 in |
| Flange OD — D | 1015 mm | 39.96 in |
| Weld neck — C | 32 mm | 1.26 in |
| WN length — H | 90 mm | 3.54 in |
| Hub / neck dia — N | 850 mm | 33.46 in |
| Raised face — d1 | 905 mm | 35.63 in |
| RF height — f | 5 mm | 0.197 in |
| Bolt circle — K | 950 mm | 37.40 in |
| Number of bolts | 24 | |
| Hole dia — L | 33 mm | 1.30 in |
| Bolt size | M30 |
Values are nominal, from IS 6392 PN 10 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN 800 IS 6392 PN 10 Flange Dimensions: common questions
What are the DN 800 IS 6392 PN 10 Flange Dimensions?
DN 800 (32") to IS 6392: pipe OD 812.8 mm; OD 1015 mm; thickness 52 mm; raised face 905 mm; RF height 5 mm.
Does Teshi Group manufacture DN 800 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 800 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 10 Flange Dimensions chart.
Need DN 800 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.