ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-038 · size page

DN 900 IS 6392 PN 10 Flange Dimensions

DN 900 (36") to IS 6392: pipe OD 914.4 mm; OD 1115 mm; thickness 56 mm; raised face 1005 mm; RF height 5 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø1115K (PCD) = Ø105028 holes × Ø33C = 56H = 95N = Ø950A = Ø914.4d1 = Ø1005DN 900 IS 6392 PN 10 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 900 IS 6392 PN 10 Flange Dimensions — all dimensions

PN 10 (Table 11) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A914.4 mm36.00 in
Flange OD — D1115 mm43.90 in
Flange — C56 mm2.20 in
Raised face — d11005 mm39.57 in
RF height — f5 mm0.197 in
Bolt circle — K1050 mm41.34 in
Number of bolts28
Hole dia — L33 mm1.30 in
Bolt sizeM30

PN 10 (Table 10 weld-neck + Table 14 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A914.4 mm36.00 in
Flange OD — D1115 mm43.90 in
Weld neck — C34 mm1.34 in
WN length — H95 mm3.74 in
Hub / neck dia — N950 mm37.40 in
Raised face — d11005 mm39.57 in
RF height — f5 mm0.197 in
Bolt circle — K1050 mm41.34 in
Number of bolts28
Hole dia — L33 mm1.30 in
Bolt sizeM30

Values are nominal, from IS 6392 PN 10 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 900 IS 6392 PN 10 Flange Dimensions: common questions

What are the DN 900 IS 6392 PN 10 Flange Dimensions?

DN 900 (36") to IS 6392: pipe OD 914.4 mm; OD 1115 mm; thickness 56 mm; raised face 1005 mm; RF height 5 mm.

Does Teshi Group manufacture DN 900 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 900 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 10 Flange Dimensions chart.

Need DN 900 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote