DN 900 IS 6392 PN 25 Flange Dimensions
DN 900 (36") to IS 6392: pipe OD 914.4 mm; OD 1185 mm; thickness 54 mm; length 145 mm; raised face 1030 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- N
- Neck / hub diameter at base
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 900 IS 6392 PN 25 Flange Dimensions — all dimensions
PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 914.4 mm | 36.00 in |
| Flange OD — D | 1185 mm | 46.65 in |
| Weld neck — C | 54 mm | 2.13 in |
| WN length — H | 145 mm | 5.71 in |
| Raised face — d1 | 1030 mm | 40.55 in |
| RF height — f | 5 mm | 0.197 in |
| Bolt circle — K | 1090 mm | 42.91 in |
| Number of bolts | 28 | |
| Hole dia — L | 48 mm | 1.89 in |
| Bolt size | M45 |
Values are nominal, from IS 6392 PN 25 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — IS 6392 PN 25 Flange Dimensions
Same size in other ratings
Related for this size
FAQ
DN 900 IS 6392 PN 25 Flange Dimensions: common questions
What are the DN 900 IS 6392 PN 25 Flange Dimensions?
DN 900 (36") to IS 6392: pipe OD 914.4 mm; OD 1185 mm; thickness 54 mm; length 145 mm; raised face 1030 mm.
Does Teshi Group manufacture DN 900 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 900 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 25 Flange Dimensions chart.
Need DN 900 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.