ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-040 · size page

DN 175 IS 6392 PN 25 Flange Dimensions

DN 175 to IS 6392: pipe OD 193.7 mm; OD 330 mm; thickness 26 mm; raised face 248 mm; RF height 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø330K (PCD) = Ø28012 holes × Ø26C = 26H = 75N = Ø218A = Ø193.7d1 = Ø248DN 175 IS 6392 PN 25 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 175 IS 6392 PN 25 Flange Dimensions — all dimensions

PN 25 (Table 23) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A193.7 mm7.63 in
Flange OD — D330 mm12.99 in
Flange — C26 mm1.02 in
Raised face — d1248 mm9.76 in
RF height — f3 mm0.118 in
Bolt circle — K280 mm11.02 in
Number of bolts12
Hole dia — L26 mm1.02 in
Bolt sizeM24

PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A193.7 mm7.63 in
Flange OD — D330 mm12.99 in
Weld neck — C28 mm1.10 in
WN length — H75 mm2.95 in
Hub / neck dia — N218 mm8.58 in
Raised face — d1248 mm9.76 in
RF height — f3 mm0.118 in
Bolt circle — K280 mm11.02 in
Number of bolts12
Hole dia — L26 mm1.02 in
Bolt sizeM24
Blind — C28 mm1.10 in

Values are nominal, from IS 6392 PN 25 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 175 IS 6392 PN 25 Flange Dimensions: common questions

What are the DN 175 IS 6392 PN 25 Flange Dimensions?

DN 175 to IS 6392: pipe OD 193.7 mm; OD 330 mm; thickness 26 mm; raised face 248 mm; RF height 3 mm.

Does Teshi Group manufacture DN 175 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 175 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 25 Flange Dimensions chart.

Need DN 175 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote