DN 175 IS 6392 PN 6 Flange Dimensions
DN 175 to IS 6392: OD 295 mm; bolts 8; bolt size M16; thickness 20 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 175 IS 6392 PN 6 Flange Dimensions — all dimensions
PN 6 (Table 4 weld-neck + Table 9 blind) — thickness and neck
| Dimension | Value | Equivalent |
|---|---|---|
| Flange OD — D | 295 mm | 11.61 in |
| Number of bolts | 8 | |
| Bolt size | M16 | |
| Blind — C | 20 mm | 0.787 in |
Values are nominal, from IS 6392 PN 6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN 175 IS 6392 PN 6 Flange Dimensions: common questions
What are the DN 175 IS 6392 PN 6 Flange Dimensions?
DN 175 to IS 6392: OD 295 mm; bolts 8; bolt size M16; thickness 20 mm.
Does Teshi Group manufacture DN 175 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 175 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 6 Flange Dimensions chart.
Need DN 175 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.