ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-037 · size page

DN 300 IS 6392 PN 6 Flange Dimensions

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 440 mm; thickness 24 mm; raised face 365 mm; RF height 4 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø440K (PCD) = Ø39512 holes × Ø22C = 24d1 = Ø365DN 300 IS 6392 PN 6 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 300 IS 6392 PN 6 Flange Dimensions — all dimensions

PN 6 (Table 5) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D440 mm17.32 in
Flange — C24 mm0.945 in
Raised face — d1365 mm14.37 in
RF height — f4 mm0.157 in
Bolt circle — K395 mm15.55 in
Number of bolts12
Hole dia — L22 mm0.866 in
Bolt sizeM20

PN 6 (Table 4 weld-neck + Table 9 blind) — thickness and neck

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D440 mm17.32 in
Weld neck — C22 mm0.866 in
WN length — H62 mm2.44 in
Raised face — d1365 mm14.37 in
RF height — f4 mm0.157 in
Number of bolts12
Hole dia — L22 mm0.866 in
Bolt sizeM20
Blind — C22 mm0.866 in

Values are nominal, from IS 6392 PN 6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 300 IS 6392 PN 6 Flange Dimensions: common questions

What are the DN 300 IS 6392 PN 6 Flange Dimensions?

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 440 mm; thickness 24 mm; raised face 365 mm; RF height 4 mm.

Does Teshi Group manufacture DN 300 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 300 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 6 Flange Dimensions chart.

Need DN 300 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote