ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-037 · size page

DN 2000 IS 6392 PN 6 Flange Dimensions

DN 2000 to IS 6392: pipe OD 2020 mm; OD 2265 mm; thickness 92 mm; raised face 2125 mm; RF height 5 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø2265K (PCD) = Ø218048 holes × Ø42C = 92d1 = Ø2125DN 2000 IS 6392 PN 6 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 2000 IS 6392 PN 6 Flange Dimensions — all dimensions

PN 6 (Table 5) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A2020 mm79.53 in
Flange OD — D2265 mm89.17 in
Flange — C92 mm3.62 in
Raised face — d12125 mm83.66 in
RF height — f5 mm0.197 in
Bolt circle — K2180 mm85.83 in
Number of bolts48
Hole dia — L42 mm1.65 in
Bolt sizeM39

PN 6 (Table 4 weld-neck + Table 9 blind) — thickness and neck

DimensionValueEquivalent
Pipe OD — A2020 mm79.53 in
Flange OD — D2265 mm89.17 in
Weld neck — C38 mm1.50 in
WN length — H110 mm4.33 in
Raised face — d12125 mm83.66 in
RF height — f5 mm0.197 in
Number of bolts48
Hole dia — L42 mm1.65 in
Bolt sizeM39

Values are nominal, from IS 6392 PN 6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 2000 IS 6392 PN 6 Flange Dimensions: common questions

What are the DN 2000 IS 6392 PN 6 Flange Dimensions?

DN 2000 to IS 6392: pipe OD 2020 mm; OD 2265 mm; thickness 92 mm; raised face 2125 mm; RF height 5 mm.

Does Teshi Group manufacture DN 2000 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 2000 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 6 Flange Dimensions chart.

Need DN 2000 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote