ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-037 · size page

DN 200 IS 6392 PN 6 Flange Dimensions

DN 200 (8") to IS 6392: pipe OD 219.1 mm; OD 320 mm; thickness 22 mm; raised face 258 mm; RF height 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø320K (PCD) = Ø2808 holes × Ø18C = 22d1 = Ø258DN 200 IS 6392 PN 6 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 200 IS 6392 PN 6 Flange Dimensions — all dimensions

PN 6 (Table 5) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A219.1 mm8.63 in
Flange OD — D320 mm12.60 in
Flange — C22 mm0.866 in
Raised face — d1258 mm10.16 in
RF height — f3 mm0.118 in
Bolt circle — K280 mm11.02 in
Number of bolts8
Hole dia — L18 mm0.709 in
Bolt sizeM16

PN 6 (Table 4 weld-neck + Table 9 blind) — thickness and neck

DimensionValueEquivalent
Pipe OD — A219.1 mm8.63 in
Flange OD — D320 mm12.60 in
Weld neck — C20 mm0.787 in
WN length — H55 mm2.17 in
Raised face — d1258 mm10.16 in
RF height — f3 mm0.118 in
Number of bolts8
Hole dia — L18 mm0.709 in
Bolt sizeM16
Blind — C20 mm0.787 in

Values are nominal, from IS 6392 PN 6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 200 IS 6392 PN 6 Flange Dimensions: common questions

What are the DN 200 IS 6392 PN 6 Flange Dimensions?

DN 200 (8") to IS 6392: pipe OD 219.1 mm; OD 320 mm; thickness 22 mm; raised face 258 mm; RF height 3 mm.

Does Teshi Group manufacture DN 200 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 200 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 6 Flange Dimensions chart.

Need DN 200 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote