ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-038 · size page

DN 200 IS 6392 PN 10 Flange Dimensions

DN 200 (8") to IS 6392: pipe OD 219.1 mm; OD 340 mm; thickness 24 mm; raised face 268 mm; RF height 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø340K (PCD) = Ø2958 holes × Ø22C = 24d1 = Ø268DN 200 IS 6392 PN 10 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 200 IS 6392 PN 10 Flange Dimensions — all dimensions

PN 10 (Table 11) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A219.1 mm8.63 in
Flange OD — D340 mm13.39 in
Flange — C24 mm0.945 in
Raised face — d1268 mm10.55 in
RF height — f3 mm0.118 in
Bolt circle — K295 mm11.61 in
Number of bolts8
Hole dia — L22 mm0.866 in
Bolt sizeM20

PN 10 (Table 10 weld-neck + Table 14 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A219.1 mm8.63 in
Flange OD — D340 mm13.39 in
Weld neck — C24 mm0.945 in
Hub / neck dia — N235 mm9.25 in
Raised face — d1268 mm10.55 in
RF height — f3 mm0.118 in
Bolt circle — K295 mm11.61 in
Number of bolts8
Hole dia — L22 mm0.866 in
Bolt sizeM20
Blind — C24 mm0.945 in
DN 250 →

Values are nominal, from IS 6392 PN 10 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

Other sizes — IS 6392 PN 10 Flange Dimensions

DN 200DN 250DN 300DN 350DN 400DN 500DN 600DN 700DN 800DN 900DN 1000DN 1200DN 1400DN 1600DN 1800DN 2000

Same size in other ratings

IS 6392 PN 100 FlangeIS 6392 PN 16 FlangeIS 6392 PN 25 FlangeIS 6392 PN 40 FlangeIS 6392 PN 6 FlangeIS 6392 PN 64 Flange

Related for this size

ASME B16.5

8" Stud Bolt Chart for ASME B16.5 Flanges

Same size — open the dimensions page.

View online · PDFASME B16.20

8" ASME B16.20 Spiral Wound Gasket Dimensions

Same size — open the dimensions page.

View online · PDFASME B16.21

8" ASME B16.21 Non-Metallic Flat Gasket Dimensions

Same size — open the dimensions page.

View online · PDFASME B36.10M

8" Pipe Schedule Chart — ASME B36.10M

Same size — open the dimensions page.

View online · PDF

FAQ

DN 200 IS 6392 PN 10 Flange Dimensions: common questions

What are the DN 200 IS 6392 PN 10 Flange Dimensions?

DN 200 (8") to IS 6392: pipe OD 219.1 mm; OD 340 mm; thickness 24 mm; raised face 268 mm; RF height 3 mm.

Does Teshi Group manufacture DN 200 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 200 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 10 Flange Dimensions chart.

Need DN 200 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Request a quoteWhatsApp +91 78900 09110info@ / sales@teshigroup.com

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

Request a quoteDownload catalogue (PDF)
CallWhatsAppGet quote