ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-038 · size page

DN 1600 IS 6392 PN 10 Flange Dimensions

DN 1600 to IS 6392: pipe OD 1620 mm; OD 1915 mm; length 130 mm; hub 1665 mm; raised face 1760 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø1915K (PCD) = Ø182040 holes × Ø48DN 1600 IS 6392 PN 10 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 1600 IS 6392 PN 10 Flange Dimensions — all dimensions

PN 10 (Table 10 weld-neck + Table 14 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A1620 mm63.78 in
Flange OD — D1915 mm75.39 in
WN length — H130 mm5.12 in
Hub / neck dia — N1665 mm65.55 in
Raised face — d11760 mm69.29 in
RF height — f5 mm0.197 in
Bolt circle — K1820 mm71.65 in
Number of bolts40
Hole dia — L48 mm1.89 in
Bolt sizeM45

Values are nominal, from IS 6392 PN 10 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 1600 IS 6392 PN 10 Flange Dimensions: common questions

What are the DN 1600 IS 6392 PN 10 Flange Dimensions?

DN 1600 to IS 6392: pipe OD 1620 mm; OD 1915 mm; length 130 mm; hub 1665 mm; raised face 1760 mm.

Does Teshi Group manufacture DN 1600 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 1600 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 10 Flange Dimensions chart.

Need DN 1600 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote