DN 10 IS 6392 PN 6 Flange Dimensions
DN 10 (3/8") to IS 6392: pipe OD 17.2 mm; OD 75 mm; thickness 12 mm; raised face 35 mm; RF height 2 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 10 IS 6392 PN 6 Flange Dimensions — all dimensions
PN 6 (Table 5) — plate flanges for welding (slip-on plate)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 17.2 mm | 0.677 in |
| Flange OD — D | 75 mm | 2.95 in |
| Flange — C | 12 mm | 0.472 in |
| Raised face — d1 | 35 mm | 1.38 in |
| RF height — f | 2 mm | 0.079 in |
| Bolt circle — K | 50 mm | 1.97 in |
| Number of bolts | 4 | |
| Hole dia — L | 11 mm | 0.433 in |
| Bolt size | M10 |
PN 6 (Table 4 weld-neck + Table 9 blind) — thickness and neck
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 17.2 mm | 0.677 in |
| Flange OD — D | 75 mm | 2.95 in |
| Weld neck — C | 12 mm | 0.472 in |
| WN length — H | 28 mm | 1.10 in |
| Raised face — d1 | 35 mm | 1.38 in |
| RF height — f | 2 mm | 0.079 in |
| Number of bolts | 4 | |
| Hole dia — L | 11 mm | 0.433 in |
| Bolt size | M10 | |
| Blind — C | 12 mm | 0.472 in |
Values are nominal, from IS 6392 PN 6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN 10 IS 6392 PN 6 Flange Dimensions: common questions
What are the DN 10 IS 6392 PN 6 Flange Dimensions?
DN 10 (3/8") to IS 6392: pipe OD 17.2 mm; OD 75 mm; thickness 12 mm; raised face 35 mm; RF height 2 mm.
Does Teshi Group manufacture DN 10 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 10 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 6 Flange Dimensions chart.
Need DN 10 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.