ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-043 · size page

DN 300 IS 6392 PN 100 Flange Dimensions

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 585 mm; thickness 84 mm; raised face 410 mm; RF height 4 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø585K (PCD) = Ø50016 holes × Ø42C = 84H = 170N = Ø400A = Ø323.9d1 = Ø410DN 300 IS 6392 PN 100 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 300 IS 6392 PN 100 Flange Dimensions — all dimensions

PN 100 (Table 38) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D585 mm23.03 in
Flange — C84 mm3.31 in
Raised face — d1410 mm16.14 in
RF height — f4 mm0.157 in
Bolt circle — K500 mm19.69 in
Number of bolts16
Hole dia — L42 mm1.65 in
Bolt sizeM39

PN 100 (Table 37) — weld-neck flanges

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D585 mm23.03 in
Weld neck — C68 mm2.68 in
WN length — H170 mm6.69 in
Hub / neck dia — N400 mm15.75 in
Raised face — d1410 mm16.14 in
RF height — f4 mm0.157 in
Bolt circle — K500 mm19.69 in
Number of bolts16
Hole dia — L42 mm1.65 in
Bolt sizeM39

Values are nominal, from IS 6392 PN 100 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 300 IS 6392 PN 100 Flange Dimensions: common questions

What are the DN 300 IS 6392 PN 100 Flange Dimensions?

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 585 mm; thickness 84 mm; raised face 410 mm; RF height 4 mm.

Does Teshi Group manufacture DN 300 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 300 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 100 Flange Dimensions chart.

Need DN 300 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote