DN 175 IS 6392 PN 100 Flange Dimensions
DN 175 to IS 6392: pipe OD 193.7 mm; OD 385 mm; raised face 260 mm; RF height 3 mm; PCD 320 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- N
- Neck / hub diameter at base
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 175 IS 6392 PN 100 Flange Dimensions — all dimensions
PN 100 (Table 38) — plate flanges for welding (slip-on plate)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 193.7 mm | 7.63 in |
| Flange OD — D | 385 mm | 15.16 in |
| Raised face — d1 | 260 mm | 10.24 in |
| RF height — f | 3 mm | 0.118 in |
| Bolt circle — K | 320 mm | 12.60 in |
| Number of bolts | 12 | |
| Hole dia — L | 33 mm | 1.30 in |
| Bolt size | M30 |
PN 100 (Table 37) — weld-neck flanges
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 193.7 mm | 7.63 in |
| Flange OD — D | 385 mm | 15.16 in |
| Weld neck — C | 48 mm | 1.89 in |
| WN length — H | 127 mm | 5.00 in |
| Hub / neck dia — N | 245 mm | 9.65 in |
| Raised face — d1 | 260 mm | 10.24 in |
| RF height — f | 3 mm | 0.118 in |
| Bolt circle — K | 320 mm | 12.60 in |
| Number of bolts | 12 | |
| Hole dia — L | 33 mm | 1.30 in |
| Bolt size | M30 |
Values are nominal, from IS 6392 PN 100 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN 175 IS 6392 PN 100 Flange Dimensions: common questions
What are the DN 175 IS 6392 PN 100 Flange Dimensions?
DN 175 to IS 6392: pipe OD 193.7 mm; OD 385 mm; raised face 260 mm; RF height 3 mm; PCD 320 mm.
Does Teshi Group manufacture DN 175 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 175 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 100 Flange Dimensions chart.
Need DN 175 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.