ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-039 · size page

DN 175 IS 6392 PN 16 Flange Dimensions

DN 175 to IS 6392: pipe OD 193.7 mm; OD 315 mm; thickness 24 mm; raised face 242 mm; RF height 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø315K (PCD) = Ø2708 holes × Ø22C = 24d1 = Ø242DN 175 IS 6392 PN 16 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 175 IS 6392 PN 16 Flange Dimensions — all dimensions

PN 16 (Table 17) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A193.7 mm7.63 in
Flange OD — D315 mm12.40 in
Flange — C24 mm0.945 in
Raised face — d1242 mm9.53 in
RF height — f3 mm0.118 in
Bolt circle — K270 mm10.63 in
Number of bolts8
Hole dia — L22 mm0.866 in
Bolt sizeM20

PN 16 (Table 16 weld-neck + Table 20 blind) — thickness

DimensionValueEquivalent
Flange OD — D315 mm12.40 in
Weld neck — C24 mm0.945 in
Blind — C24 mm0.945 in

Values are nominal, from IS 6392 PN 16 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 175 IS 6392 PN 16 Flange Dimensions: common questions

What are the DN 175 IS 6392 PN 16 Flange Dimensions?

DN 175 to IS 6392: pipe OD 193.7 mm; OD 315 mm; thickness 24 mm; raised face 242 mm; RF height 3 mm.

Does Teshi Group manufacture DN 175 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 175 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 16 Flange Dimensions chart.

Need DN 175 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote