ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-039 · size page

DN 20 IS 6392 PN 16 Flange Dimensions

DN 20 (3/4") to IS 6392: pipe OD 26.9 mm; OD 105 mm; thickness 16 mm; raised face 58 mm; RF height 2 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø105K (PCD) = Ø754 holes × Ø14C = 16d1 = Ø58DN 20 IS 6392 PN 16 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 20 IS 6392 PN 16 Flange Dimensions — all dimensions

PN 16 (Table 17) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A26.9 mm1.06 in
Flange OD — D105 mm4.13 in
Flange — C16 mm0.630 in
Raised face — d158 mm2.28 in
RF height — f2 mm0.079 in
Bolt circle — K75 mm2.95 in
Number of bolts4
Hole dia — L14 mm0.551 in
Bolt sizeM12

PN 16 (Table 16 weld-neck + Table 20 blind) — thickness

DimensionValueEquivalent
Flange OD — D105 mm4.13 in
Weld neck — C16 mm0.630 in
Blind — C16 mm0.630 in

Values are nominal, from IS 6392 PN 16 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 20 IS 6392 PN 16 Flange Dimensions: common questions

What are the DN 20 IS 6392 PN 16 Flange Dimensions?

DN 20 (3/4") to IS 6392: pipe OD 26.9 mm; OD 105 mm; thickness 16 mm; raised face 58 mm; RF height 2 mm.

Does Teshi Group manufacture DN 20 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 20 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 16 Flange Dimensions chart.

Need DN 20 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote