ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-043 · size page

DN 25 IS 6392 PN 100 Flange Dimensions

DN 25 (1") to IS 6392: pipe OD 33.7 mm; OD 140 mm; thickness 24 mm; raised face 68 mm; RF height 2 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø140K (PCD) = Ø1004 holes × Ø18C = 24H = 58N = Ø52A = Ø33.7d1 = Ø68DN 25 IS 6392 PN 100 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 25 IS 6392 PN 100 Flange Dimensions — all dimensions

PN 100 (Table 38) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A33.7 mm1.33 in
Flange OD — D140 mm5.51 in
Flange — C24 mm0.945 in
Raised face — d168 mm2.68 in
RF height — f2 mm0.079 in
Bolt circle — K100 mm3.94 in
Number of bolts4
Hole dia — L18 mm0.709 in
Bolt sizeM16

PN 100 (Table 37) — weld-neck flanges

DimensionValueEquivalent
Pipe OD — A33.7 mm1.33 in
Flange OD — D140 mm5.51 in
Weld neck — C24 mm0.945 in
WN length — H58 mm2.28 in
Hub / neck dia — N52 mm2.05 in
Raised face — d168 mm2.68 in
RF height — f2 mm0.079 in
Bolt circle — K100 mm3.94 in
Number of bolts4
Hole dia — L18 mm0.709 in
Bolt sizeM16

Values are nominal, from IS 6392 PN 100 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 25 IS 6392 PN 100 Flange Dimensions: common questions

What are the DN 25 IS 6392 PN 100 Flange Dimensions?

DN 25 (1") to IS 6392: pipe OD 33.7 mm; OD 140 mm; thickness 24 mm; raised face 68 mm; RF height 2 mm.

Does Teshi Group manufacture DN 25 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 25 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 100 Flange Dimensions chart.

Need DN 25 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote