DN 65 IS 6392 PN 100 Flange Dimensions
DN 65 (2 1/2") to IS 6392: pipe OD 76.1 mm; OD 220 mm; thickness 30 mm; raised face 122 mm; RF height 3 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- N
- Neck / hub diameter at base
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 65 IS 6392 PN 100 Flange Dimensions — all dimensions
PN 100 (Table 38) — plate flanges for welding (slip-on plate)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 76.1 mm | 3.00 in |
| Flange OD — D | 220 mm | 8.66 in |
| Flange — C | 30 mm | 1.18 in |
| Raised face — d1 | 122 mm | 4.80 in |
| RF height — f | 3 mm | 0.118 in |
| Bolt circle — K | 170 mm | 6.69 in |
| Number of bolts | 8 | |
| Hole dia — L | 26 mm | 1.02 in |
| Bolt size | M24 |
PN 100 (Table 37) — weld-neck flanges
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 76.1 mm | 3.00 in |
| Flange OD — D | 220 mm | 8.66 in |
| Weld neck — C | 30 mm | 1.18 in |
| WN length — H | 76 mm | 2.99 in |
| Hub / neck dia — N | 108 mm | 4.25 in |
| Raised face — d1 | 122 mm | 4.80 in |
| RF height — f | 3 mm | 0.118 in |
| Bolt circle — K | 170 mm | 6.69 in |
| Number of bolts | 8 | |
| Hole dia — L | 26 mm | 1.02 in |
| Bolt size | M24 |
Values are nominal, from IS 6392 PN 100 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — IS 6392 PN 100 Flange Dimensions
Same size in other ratings
Related for this size
2½" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.202½" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.212½" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M2½" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
DN 65 IS 6392 PN 100 Flange Dimensions: common questions
What are the DN 65 IS 6392 PN 100 Flange Dimensions?
DN 65 (2 1/2") to IS 6392: pipe OD 76.1 mm; OD 220 mm; thickness 30 mm; raised face 122 mm; RF height 3 mm.
Does Teshi Group manufacture DN 65 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 65 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 100 Flange Dimensions chart.
Need DN 65 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.