ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-040 · size page

DN 300 IS 6392 PN 25 Flange Dimensions

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 485 mm; thickness 38 mm; raised face 395 mm; RF height 4 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø485K (PCD) = Ø43016 holes × Ø30C = 38H = 92N = Ø352A = Ø323.9d1 = Ø395DN 300 IS 6392 PN 25 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 300 IS 6392 PN 25 Flange Dimensions — all dimensions

PN 25 (Table 23) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D485 mm19.09 in
Flange — C38 mm1.50 in
Raised face — d1395 mm15.55 in
RF height — f4 mm0.157 in
Bolt circle — K430 mm16.93 in
Number of bolts16
Hole dia — L30 mm1.18 in
Bolt sizeM27

PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A323.9 mm12.75 in
Flange OD — D485 mm19.09 in
Weld neck — C34 mm1.34 in
WN length — H92 mm3.62 in
Hub / neck dia — N352 mm13.86 in
Raised face — d1395 mm15.55 in
RF height — f4 mm0.157 in
Bolt circle — K430 mm16.93 in
Number of bolts16
Hole dia — L30 mm1.18 in
Bolt sizeM27
Blind — C34 mm1.34 in

Values are nominal, from IS 6392 PN 25 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 300 IS 6392 PN 25 Flange Dimensions: common questions

What are the DN 300 IS 6392 PN 25 Flange Dimensions?

DN 300 (12") to IS 6392: pipe OD 323.9 mm; OD 485 mm; thickness 38 mm; raised face 395 mm; RF height 4 mm.

Does Teshi Group manufacture DN 300 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 300 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 25 Flange Dimensions chart.

Need DN 300 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote