ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-040 · size page

DN 700 IS 6392 PN 25 Flange Dimensions

DN 700 (28") to IS 6392: pipe OD 711.2 mm; OD 960 mm; thickness 46 mm; length 125 mm; hub 760 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø960K (PCD) = Ø87524 holes × Ø42C = 46H = 125N = Ø760A = Ø711.2d1 = Ø820DN 700 IS 6392 PN 25 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 700 IS 6392 PN 25 Flange Dimensions — all dimensions

PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A711.2 mm28.00 in
Flange OD — D960 mm37.80 in
Weld neck — C46 mm1.81 in
WN length — H125 mm4.92 in
Hub / neck dia — N760 mm29.92 in
Raised face — d1820 mm32.28 in
RF height — f5 mm0.197 in
Bolt circle — K875 mm34.45 in
Number of bolts24
Hole dia — L42 mm1.65 in
Bolt sizeM39

Values are nominal, from IS 6392 PN 25 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 700 IS 6392 PN 25 Flange Dimensions: common questions

What are the DN 700 IS 6392 PN 25 Flange Dimensions?

DN 700 (28") to IS 6392: pipe OD 711.2 mm; OD 960 mm; thickness 46 mm; length 125 mm; hub 760 mm.

Does Teshi Group manufacture DN 700 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 700 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 25 Flange Dimensions chart.

Need DN 700 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote