EN 1092-1 PN6 Flange Dimensions
This chart gives EN 1092-1 PN6 flange dimensions in millimetres — outside diameter, bolt circle, bolt holes and bolting, thickness for plate, blind and weld-neck flanges, and raised-face diameter.
Teshi Group manufactures flanges to EN 1092-1 on request — weld neck (Type 11), slip-on (Type 12), plate (Type 01) and blind (Type 05) — alongside its ASME B16.5 range.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
EN 1092-1 PN6 Flange Dimensions — tables
EN 1092-1 PN 6 flange dimensions (mm)
| SizeDN | APipe OD | DFlange OD | KBolt circle | nBolts | LHole dia | BoltSize | CPlate (Type 01) | CBlind (Type 05) | CWeld neck (Type 11) | d1Raised face |
|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 17.2 | 75 | 50 | 4 | 11 | M10 | 12 | 12 | 12 | 35 |
| 15 | 21.3 | 80 | 55 | 4 | 11 | M10 | 12 | 12 | 12 | 40 |
| 20 | 26.9 | 90 | 65 | 4 | 11 | M10 | 14 | 14 | 14 | 50 |
| 25 | 33.7 | 100 | 75 | 4 | 11 | M10 | 14 | 14 | 14 | 60 |
| 32 | 42.4 | 120 | 90 | 4 | 14 | M12 | 16 | 14 | 14 | 70 |
| 40 | 48.3 | 130 | 100 | 4 | 14 | M12 | 16 | 14 | 14 | 80 |
| 50 | 60.3 | 140 | 110 | 4 | 14 | M12 | 16 | 14 | 14 | 90 |
| 65 | 76.1 | 160 | 130 | 4 | 14 | M12 | 16 | 14 | 14 | 110 |
| 80 | 88.9 | 190 | 150 | 4 | 18 | M16 | 18 | 16 | 16 | 128 |
| 100 | 114.3 | 210 | 170 | 4 | 18 | M16 | 18 | 16 | 16 | 148 |
| 125 | 139.7 | 240 | 200 | 8 | 18 | M16 | 20 | 18 | 18 | 178 |
| 150 | 168.3 | 265 | 225 | 8 | 18 | M16 | 20 | 18 | 18 | 202 |
| 200 | 219.1 | 320 | 280 | 8 | 18 | M16 | 22 | 20 | 20 | 258 |
| 250 | 273.0 | 375 | 335 | 12 | 18 | M16 | 24 | 22 | 22 | 312 |
| 300 | 323.9 | 440 | 395 | 12 | 22 | M20 | 24 | 22 | 22 | 365 |
| 350 | 355.6 | 490 | 445 | 12 | 22 | M20 | 26 | 22 | 22 | 415 |
| 400 | 406.4 | 540 | 495 | 16 | 22 | M20 | 28 | 22 | 22 | 465 |
| 450 | 457.0 | 595 | 550 | 16 | 22 | M20 | 30 | 24 | 22 | 520 |
| 500 | 508.0 | 645 | 600 | 20 | 22 | M20 | 30 | 24 | 24 | 570 |
| 600 | 610.0 | 755 | 705 | 20 | 26 | M24 | 32 | 30 | 30 | 670 |
| 700 | 711.0 | 860 | 810 | 24 | 26 | M24 | — | 40 | — | 775 |
| 800 | 813.0 | 975 | 920 | 24 | 30 | M27 | — | 44 | — | 880 |
| 900 | 914.0 | 1075 | 1020 | 24 | 30 | M27 | — | 48 | — | 980 |
| 1000 | 1016.0 | 1175 | 1120 | 28 | 30 | M27 | — | 52 | — | 1080 |
| 1200 | 1219.0 | 1405 | 1340 | 32 | 33 | M30 | — | 60 | — | 1295 |
| 1400 | 1422.0 | 1630 | 1560 | 36 | 36 | M33 | — | 68 | — | 1510 |
| 1600 | 1626.0 | 1830 | 1760 | 40 | 36 | M33 | — | 76 | — | 1710 |
| 1800 | 1829.0 | 2045 | 1970 | 44 | 39 | M36 | — | 84 | — | 1920 |
| 2000 | 2032.0 | 2265 | 2180 | 48 | 42 | M39 | — | 92 | — | 2125 |
| 2200 | 2235.0 | 2475 | 2390 | 52 | 42 | M39 | — | — | — | 2335 |
| 2400 | 2438.0 | 2685 | 2600 | 56 | 42 | M39 | — | — | — | 2545 |
| 2600 | 2620.0 | 2905 | 2810 | 60 | 48 | M45 | — | — | — | 2750 |
| 2800 | 2820.0 | 3115 | 3020 | 64 | 48 | M45 | — | — | — | 2960 |
| 3000 | 3020.0 | 3315 | 3220 | 68 | 48 | M45 | — | — | — | 3160 |
| 3200 | 3220.0 | 3525 | 3430 | 72 | 48 | M45 | — | — | — | 3370 |
| 3400 | 3420.0 | 3735 | 3640 | 76 | 48 | M45 | — | — | — | 3580 |
| 3600 | 3620.0 | 3970 | 3860 | 80 | 56 | M52 | — | — | — | 3790 |
Notes
- All dimensions are in millimetres.
- Outside diameter, bolt circle and drilling are common to all EN 1092-1 flange types of the same DN and PN.
- Values are nominal, compiled from published copies of the standard; blank cells (—) are values not confirmed from the sources available. Verify against the current edition before design, purchase or fabrication.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
Dimension finder
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
EN 1092-1 PN6 Flange Dimensions — size by size
Every size has its own page with a drawing, mm and inch values and a one-size PDF.
Equivalent and related standards to EN 1092-1 PN6 Flange Dimensions
All equivalents| Region | Standard | Relationship |
|---|---|---|
| China | HG/T 20592 PN 6 | Chemical-industry PN flanges — EN 1092-1 (European system) dimensions |
| China | GB/T 9124.1 PN 6 | National standard steel pipe flanges, PN series — EN 1092-1 dimensions |
| International | ISO 7005-1 PN 6 | ISO steel flanges, PN series |
| Germany | DIN 2631–2638 / DIN 2501 PN 6 (withdrawn) | Former DIN flanges replaced by EN 1092-1 |
| UK | BS 4504 PN 6 (withdrawn) | Former British PN flanges replaced by EN 1092-1 |
| India | IS 6392 PN 6 | Indian PN flanges — closely related tables; check drilling |
| USA | ASME B16.5 (nearest class) | Not interchangeable — inch-based Class system |
Teshi Group manufactures flanges and fittings to all of these standards on request, including Chinese GB / HG / SH and European EN dimensions for export projects. Always confirm bolting, facing and thickness when substituting one standard for another.
FAQ
EN 1092-1 PN6 Flange dimensions: common questions
What are the dimensions of a DN100 PN6 flange?
A DN100 PN6 flange to EN 1092-1 has an outside diameter of 210 mm, a bolt circle of 170 mm and 4 holes of 18 mm for M16 bolts.
Is EN 1092-1 PN6 interchangeable with ASME B16.5?
No. EN 1092-1 flanges use metric bolt circles and bolts; they will not bolt to ASME B16.5 flanges without special drilling.
Does Teshi Group manufacture EN 1092-1 flanges?
Teshi Group manufactures steel flanges in India to EN 1092-1 drilling — weld neck, slip-on, plate and blind — in carbon, alloy, stainless, duplex and nickel-alloy grades, with EN 10204 3.1 certificates.
Related products, data sheets and standards
Slip-On Flange
OEM manufacturer
View online · PDFTechnical data sheetWeld Neck Flange
OEM manufacturer
View online · PDFTechnical data sheetBlind Flange
OEM manufacturer
View online · PDFEN 1092-1EN 1092-1 PN10 flange dimensions
PN10 weld neck, slip-on, plate and blind flange drilling, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN16 flange dimensions
PN16 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN25 flange dimensions
PN25 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDFEN 1092-1EN 1092-1 PN40 flange dimensions
PN40 weld neck, slip-on, plate and blind flange drilling and thickness, DN10–600, in mm.
View online · PDF
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.