DN 250 EN 1092-1 PN6 Flange Dimensions
DN 250 (10") to EN 1092-1: pipe OD 273.0 mm; OD 375 mm; PCD 335 mm; bolts 12; holes 18 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 250 EN 1092-1 PN6 Flange Dimensions — all dimensions
EN 1092-1 PN 6 flange dimensions (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 273.0 mm | 10.75 in |
| Flange OD — D | 375 mm | 14.76 in |
| Bolt circle — K | 335 mm | 13.19 in |
| Number of bolts | 12 | |
| Hole dia — L | 18 mm | 0.709 in |
| Bolt size | M16 | |
| Plate (Type 01) — C | 24 mm | 0.945 in |
| Blind (Type 05) — C | 22 mm | 0.866 in |
| Weld neck (Type 11) — C | 22 mm | 0.866 in |
| Raised face — d1 | 312 mm | 12.28 in |
Values are nominal, from EN 1092-1 PN6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — EN 1092-1 PN6 Flange Dimensions
Same size in other ratings
Related for this size
10" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.2010" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.2110" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M10" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
DN 250 EN 1092-1 PN6 Flange Dimensions: common questions
What are the DN 250 EN 1092-1 PN6 Flange Dimensions?
DN 250 (10") to EN 1092-1: pipe OD 273.0 mm; OD 375 mm; PCD 335 mm; bolts 12; holes 18 mm.
Does Teshi Group manufacture DN 250 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 250 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN6 Flange Dimensions chart.
Need DN 250 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.