ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
EN 1092-1FlangesTG-DS-067 · size page

DN 700 EN 1092-1 PN6 Flange Dimensions

DN 700 (28") to EN 1092-1: pipe OD 711.0 mm; OD 860 mm; PCD 810 mm; bolts 24; holes 26 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø860K (PCD) = Ø81024 holes × Ø26C = 40d1 = Ø775DN 700 EN 1092-1 PN6 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 700 EN 1092-1 PN6 Flange Dimensions — all dimensions

EN 1092-1 PN 6 flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A711.0 mm27.99 in
Flange OD — D860 mm33.86 in
Bolt circle — K810 mm31.89 in
Number of bolts24
Hole dia — L26 mm1.02 in
Bolt sizeM24
Blind (Type 05) — C40 mm1.57 in
Raised face — d1775 mm30.51 in

Values are nominal, from EN 1092-1 PN6 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 700 EN 1092-1 PN6 Flange Dimensions: common questions

What are the DN 700 EN 1092-1 PN6 Flange Dimensions?

DN 700 (28") to EN 1092-1: pipe OD 711.0 mm; OD 860 mm; PCD 810 mm; bolts 24; holes 26 mm.

Does Teshi Group manufacture DN 700 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 700 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN6 Flange Dimensions chart.

Need DN 700 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote