ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
AS 2129FlangesTG-DS-056 · Rev. 0 · October 2026

AS 2129 Table F Flange Dimensions

This chart gives AS 2129 Table F flange dimensions in millimetres — outside diameter, minimum thickness for steel, cast iron, ductile iron and copper-alloy flanges, pitch circle diameter and bolting. AS 2129 is the Australian flange standard used across Australia, New Zealand and on Australian-design projects.

Teshi Group manufactures steel flanges drilled to AS 2129 tables in India for export.

Download PDF Request a quoteA4 · Teshi Group document TG-DS-056 · © Teshi Group · controlled document
Weld neck flange dimension drawing showing O, tf, R, X, A, Y and bolt circle WANd1KDCHFlange, raised face — section (not to scale)
Weld neck flange with raised face. Letters correspond to the column headings in the table.

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

AS 2129 Table F Flange Dimensions — tables

AS 2129 Table F — flange dimensions (mm)

AS 2129 Table F — flange dimensions (mm)
SizeDNSize · inDFlange OD · mmCSteel · mmCCast iron · mmCDuctile iron · mmCCopper alloy · mmKBolt circle · mmnBoltsLHole dia · mmBoltSize
151/295101313867414M12
203/4100101313873414M12
2511201013131087418M16
321 1/41351316161098418M16
401 1/214013161611105418M16
50216516191911127418M16
652 1/218516191913146818M16
80320516191914165818M16
100423019222217191818M16
125528022252519235822M20
1506305222525222601222M20
2008370252929253241222M20
25010430252929253811226M24
30012490293232294381626M24
35014550323535324951630M27
37515578————5211630M27
40016610323535325522030M27
45018675————6102033M30
50020735————6732433M30
60024850————7812436M33

Notes

  • All dimensions are in millimetres.
  • AS 2129 Tables D, E, F and H keep the inch-based drilling of the old BS 10 tables, converted to millimetres, so they generally mate with BS 10 flanges of the same table.
  • Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

Equivalent and related standards to AS 2129 Table F Flange Dimensions

All equivalents
RegionStandardRelationship
UKBS 10 Table FOriginal British table the AS 2129 table is derived from
AustraliaAS 4087Metallic flanges for waterworks, PN 14–PN 35

Teshi Group manufactures flanges and fittings to all of these standards on request, including Chinese GB / HG / SH and European EN dimensions for export projects. Always confirm bolting, facing and thickness when substituting one standard for another.

Dimension finder

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

AS 2129 Table F Flange Dimensions — size by size

Every size has its own page with a drawing, mm and inch values and a one-size PDF.

FAQ

AS 2129 Table F Flange dimensions: common questions

What is the PCD of a DN 100 AS 2129 Table F flange?

A DN 100 AS 2129 Table F flange has an outside diameter of 230 mm, a pitch circle of 191 mm and 8 holes of 18 mm for M16 bolts.

Will AS 2129 Table F mate with BS 10 Table F?

In most sizes yes — AS 2129 retained the BS 10 drilling — but confirm OD, PCD and hole size for each size before ordering.

Does Teshi Group manufacture AS 2129 flanges?

Teshi Group manufactures steel flanges in India to AS 2129 drilling — weld neck, slip-on, plate and blind — in carbon, alloy, stainless, duplex and nickel-alloy grades, with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote