ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
AS 2129FlangesTG-DS-056 · size page

DN 500 AS 2129 Table F Flange Dimensions

DN 500 (20") to AS 2129: OD 735 mm; PCD 673 mm; bolts 24; holes 33 mm; bolt size M30.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø735K (PCD) = Ø67324 holes × Ø33DN 500 AS 2129 Table F Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 500 AS 2129 Table F Flange Dimensions — all dimensions

AS 2129 Table F — flange dimensions (mm)

DimensionValueEquivalent
Size20
Flange OD — D735 mm28.94 in
Bolt circle — K673 mm26.50 in
Number of bolts24
Hole dia — L33 mm1.30 in
Bolt sizeM30

Values are nominal, from AS 2129 Table F Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 500 AS 2129 Table F Flange Dimensions: common questions

What are the DN 500 AS 2129 Table F Flange Dimensions?

DN 500 (20") to AS 2129: OD 735 mm; PCD 673 mm; bolts 24; holes 33 mm; bolt size M30.

Does Teshi Group manufacture DN 500 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to AS 2129, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 500 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full AS 2129 Table F Flange Dimensions chart.

Need DN 500 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote