DN 375 AS 2129 Table F Flange Dimensions
DN 375 to AS 2129: OD 578 mm; PCD 521 mm; bolts 16; holes 30 mm; bolt size M27.
Key to dimensions
- D
- Outside diameter of flange
- C
- Flange thickness, excluding raised face unless stated
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 375 AS 2129 Table F Flange Dimensions — all dimensions
AS 2129 Table F — flange dimensions (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Size | 15 | |
| Flange OD — D | 578 mm | 22.76 in |
| Bolt circle — K | 521 mm | 20.51 in |
| Number of bolts | 16 | |
| Hole dia — L | 30 mm | 1.18 in |
| Bolt size | M27 |
Values are nominal, from AS 2129 Table F Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN 375 AS 2129 Table F Flange Dimensions: common questions
What are the DN 375 AS 2129 Table F Flange Dimensions?
DN 375 to AS 2129: OD 578 mm; PCD 521 mm; bolts 16; holes 30 mm; bolt size M27.
Does Teshi Group manufacture DN 375 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to AS 2129, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 375 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full AS 2129 Table F Flange Dimensions chart.
Need DN 375 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.