ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
JIS B2220FlangesTG-DS-058 · Rev. 0 · October 2026

JIS B2220 5K Flange Dimensions

This chart gives JIS B2220 5K steel pipe flange dimensions in millimetres — outside diameter, thickness, raised face, bolt circle, bolt holes and bolt size. JIS B2220 is the Japanese flange standard used on Japanese-design plant, shipbuilding and marine piping.

Teshi Group manufactures JIS B2220 slip-on, weld neck and blind flanges in India for export and marine work.

Download PDF Request a quoteA4 · Teshi Group document TG-DS-058 · © Teshi Group · controlled document
Weld neck flange dimension drawing showing O, tf, R, X, A, Y and bolt circle WANd1KDCHFlange, raised face — section (not to scale)
Weld neck flange with raised face. Letters correspond to the column headings in the table.

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

JIS B2220 5K Flange Dimensions — tables

JIS B2220 5K — slip-on / blind flange dimensions (mm)

JIS B2220 5K — slip-on / blind flange dimensions (mm)
SizeAAPipe ODDFlange ODCFlanged1Raised faceKBolt circlenBoltsLHole diaBoltSize
1017.37593955412M10
1521.78094460412M10
2027.285104965412M10
2534.095105975412M10
3242.7115127090415M12
4048.6120127595415M12
5060.51301485105415M12
6576.315514110130415M12
8089.118014121145419M16
(90)101.619014131155419M16
100114.320016141165819M16
125139.823516176200819M16
150165.226518206230819M16
(175)190.730018232260823M20
200216.332020252280823M20
(225)241.8345202773051223M20
250267.4385223173451223M20
300318.5430223603901223M20
350355.6480244034351225M22
400406.4540244634951625M22
450457.2605245235551625M22
500508.0655245736052025M22
(550)558.8720266306652027M24
600609.6770266807152027M24
(650)660.482526(28)7357702427M24
700711.287526(30)7858202427M24
(750)762.094528(32)8408802433M30
800812.899528(34)8909302433M30
(850)863.6104528(36)9409802433M30
900914.4109530(36)99010302433M30
10001016.0119532(40)109011302833M30
11001117.6130532(44)120012402833M30
12001219.2142034(48)130513503233M30
13501371.6157534(48)146015053233M30
15001524.0173036(58)161516603633M30

Notes

  • All dimensions are in millimetres. Nominal size is the JIS 'A' size (e.g. 100A = DN 100).
  • Thickness values in parentheses apply to blind flanges.
  • Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

Equivalent and related standards to JIS B2220 5K Flange Dimensions

All equivalents
RegionStandardRelationship
KoreaKS B 1511 5KKorean flanges with JIS-based dimensions
JapanJIS B2239 / B2240Cast iron and copper-alloy flanges with the same K ratings
USA / EuropeASME B16.5 / EN 1092-1Not interchangeable with JIS K-rated flanges

Teshi Group manufactures flanges and fittings to all of these standards on request, including Chinese GB / HG / SH and European EN dimensions for export projects. Always confirm bolting, facing and thickness when substituting one standard for another.

Dimension finder

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

JIS B2220 5K Flange Dimensions — size by size

Every size has its own page with a drawing, mm and inch values and a one-size PDF.

FAQ

JIS B2220 5K Flange dimensions: common questions

What are the dimensions of a 100A JIS 5K flange?

A 100A JIS B2220 5K flange has an outside diameter of 200 mm, thickness 16 mm, a bolt circle of 165 mm and 8 holes of 19 mm for M16 bolts.

Is JIS 5K interchangeable with PN 10 or ASME Class 150?

No. JIS B2220 bolt circles and hole counts differ from EN 1092-1 and ASME B16.5 in most sizes, so JIS flanges must mate with JIS flanges of the same rating.

Does Teshi Group manufacture JIS flanges?

Teshi Group manufactures steel flanges in India to JIS B2220 drilling — weld neck, slip-on, plate and blind — in carbon, alloy, stainless, duplex and nickel-alloy grades, with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote