ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
JIS B2220FlangesTG-DS-058 · size page

700A JIS B2220 5K Flange Dimensions

700A (DN 700) to JIS B2220: pipe OD 711.2 mm; OD 875 mm; thickness 26(30) mm; raised face 785 mm; PCD 820 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø875K (PCD) = Ø82024 holes × Ø27C = 26(30)d1 = Ø785700A JIS B2220 5K Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

700A JIS B2220 5K Flange Dimensions — all dimensions

JIS B2220 5K — slip-on / blind flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A711.2 mm28.00 in
Flange OD — D875 mm34.45 in
Flange — C26(30) mm1.02 in
Raised face — d1785 mm30.91 in
Bolt circle — K820 mm32.28 in
Number of bolts24
Hole dia — L27 mm1.06 in
Bolt sizeM24

Values are nominal, from JIS B2220 5K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

700A JIS B2220 5K Flange Dimensions: common questions

What are the 700A JIS B2220 5K Flange Dimensions?

700A (DN 700) to JIS B2220: pipe OD 711.2 mm; OD 875 mm; thickness 26(30) mm; raised face 785 mm; PCD 820 mm.

Does Teshi Group manufacture 700A flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to JIS B2220, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 700A dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full JIS B2220 5K Flange Dimensions chart.

Need 700A flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote