Austenitic stainless steel grades — 304, 316, 321, 347, 310
Austenitic stainless steels are iron–chromium–nickel alloys with 16–26 % chromium and 8–22 % nickel. Nickel keeps the structure austenitic (face-centred cubic), which makes these steels non-magnetic when annealed, very tough down to cryogenic temperatures, and easy to form and weld.
What austenitic stainless steel is
The 300-series family covers most stainless piping: 304/304L for general corrosion, 316/316L with molybdenum for chlorides, 321 and 347 stabilised against sensitisation, H grades for high-temperature strength, 317L for more aggressive chemicals, and 310/310S for oxidation resistance up to about 1100 °C.
- Chromium 16–26 % and nickel 8–22 %
- L grades: carbon 0.030–0.035 % max to avoid sensitisation when welded
- H grades: carbon 0.04–0.10 % for creep strength above about 525 °C
- Ti- or Nb-stabilised grades (321, 347, 316Ti) tie up carbon as carbides
- Molybdenum 2–4 % in 316/317 for pitting resistance
Key properties
| Minimum yield (annealed) | 170 MPa (L grades) – 205 MPa |
|---|---|
| Minimum tensile | 485–515 MPa |
| Toughness | Excellent down to −196 °C (cryogenic) |
| Magnetic | Non-magnetic when annealed |
| ASME B16.5 material groups | 2.1 (304), 2.2 (316), 2.3 (304L/316L), 2.4 (321), 2.5 (347), 2.11 (310) |
Austenitic stainless steel grades compared
Chemistry and minimum room-temperature properties from the governing ASTM / ASME / API specifications. PREN = Cr + 3.3Mo + 16N using specification minimums. Open any grade for its full data sheet and PDF.
| Grade | Form | UNS | Cr% | Ni% | Mo% | N% | PRENmin | YieldMPa min | TensileMPa min |
|---|---|---|---|---|---|---|---|---|---|
| ASTM A182 F304 | Forged flanges & fittings | S30400 | 18.0–20.0 | 8.0–11.0 | — | 0.10 max | 18 | 205 | 515 |
| ASTM A182 F304L | Forged flanges & fittings | S30403 | 18.0–20.0 | 8.0–13.0 | — | 0.10 max | 18 | 170 | 485 |
| ASTM A182 F316 | Forged flanges & fittings | S31600 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 max | 23 | 205 | 515 |
| ASTM A182 F316L | Forged flanges & fittings | S31603 | 16.0–18.0 | 10.0–15.0 | 2.00–3.00 | 0.10 max | 23 | 170 | 485 |
| ASTM A182 F321 | Forged flanges & fittings | S32100 | 17.0–19.0 | 9.0–12.0 | — | — | 17 | 205 | 515 |
| ASTM A312 TP304 | Seamless pipe (seamless & welded) | S30400 | 18.0–20.0 | 8.0–11.0 | — | — | 18 | 205 | 515 |
| ASTM A312 TP304L | Seamless pipe (seamless & welded) | S30403 | 18.0–20.0 | 8.0–13.0 | — | — | 18 | 170 | 485 |
| ASTM A312 TP316 | Seamless pipe (seamless & welded) | S31600 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — | 23 | 205 | 515 |
| ASTM A312 TP316L | Seamless pipe (seamless & welded) | S31603 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — | 23 | 170 | 485 |
| ASTM A403 WP304 | Wrought butt-weld fittings | S30400 | 18.0–20.0 | 8.0–11.0 | — | — | 18 | 205 | 515 |
| ASTM A403 WP304L | Wrought butt-weld fittings | S30403 | 18.0–20.0 | 8.0–12.0 | — | — | 18 | 170 | 485 |
| ASTM A403 WP316 | Wrought butt-weld fittings | S31600 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — | 23 | 205 | 515 |
| ASTM A403 WP316L | Wrought butt-weld fittings | S31603 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — | 23 | 170 | 485 |
| ASTM A351 CF8M | Austenitic steel castings | J92900 | 18.0–21.0 | 9.0–12.0 | 2.0–3.0 | — | 25 | 205 | 485 |
| ASTM A182 F304H | Forged flanges & fittings | S30409 | 18.0–20.0 | 8.0–11.0 | — | — | 18 | 205 | 515 |
| ASTM A182 F316H | Forged flanges & fittings | S31609 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — | 23 | 205 | 515 |
| ASTM A182 F316Ti | Forged flanges & fittings | S31635 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 max | 23 | 205 | 515 |
| ASTM A182 F317L | Forged flanges & fittings | S31703 | 18.0–20.0 | 11.0–15.0 | 3.0–4.0 | — | 28 | 170 | 485 |
| ASTM A182 F310 | Forged flanges & fittings | S31000 | 24.0–26.0 | 19.0–22.0 | — | — | 24 | 205 | 515 |
| ASTM A182 F321H | Forged flanges & fittings | S32109 | 17.0–19.0 | 9.0–12.0 | — | — | 17 | 205 | 515 |
| ASTM A182 F347 | Forged flanges & fittings | S34700 | 17.0–20.0 | 9.0–13.0 | — | — | 17 | 205 | 515 |
| ASTM A182 F347H | Forged flanges & fittings | S34709 | 17.0–20.0 | 9.0–13.0 | — | — | 17 | 205 | 515 |
| ASTM A312 TP304H | Seamless & welded pipe | S30409 | 18.0–20.0 | 8.0–11.0 | — | — | 18 | 205 | 515 |
| ASTM A312 TP316H | Seamless & welded pipe | S31609 | 16.0–18.0 | 11.0–14.0 | 2.00–3.00 | — | 23 | 205 | 515 |
| ASTM A312 TP321 | Seamless & welded pipe | S32100 | 17.0–19.0 | 9.0–12.0 | — | 0.10 max | 17 | 205 | 515 |
| ASTM A312 TP347 | Seamless & welded pipe | S34700 | 17.0–19.0 | 9.0–13.0 | — | — | 17 | 205 | 515 |
| ASTM A312 TP310S | Seamless & welded pipe | S31008 | 24.0–26.0 | 19.0–22.0 | 0.75 max | — | 24 | 205 | 515 |
| ASTM A312 TP317L | Seamless & welded pipe | S31703 | 18.0–20.0 | 11.0–15.0 | 3.0–4.0 | — | 28 | 205 | 515 |
| ASTM A403 WP321 | Wrought butt-weld fittings | S32100 | 17.0–19.0 | 9.0–12.0 | — | 0.10 max | 17 | 205 | 515 |
| ASTM A403 WP347 | Wrought butt-weld fittings | S34700 | 17.0–19.0 | 9.0–13.0 | — | — | 17 | 205 | 515 |
| ASTM A403 WP310S | Wrought butt-weld fittings | S31008 | 24.0–26.0 | 19.0–22.0 | 0.75 max | — | 24 | 205 | 515 |
| ASTM A403 WP317L | Wrought butt-weld fittings | S31703 | 18.0–20.0 | 11.0–15.0 | 3.0–4.0 | — | 28 | 205 | 515 |
| ASTM A351 CF8 | Austenitic steel castings | J92600 | 18.0–21.0 | 8.0–11.0 | 0.50 max | — | 18 | 205 | 485 |
| ASTM A351 CF3M | Austenitic steel castings | J92800 | 17.0–21.0 | 9.0–13.0 | 2.0–3.0 | — | 24 | 205 | 485 |
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
Specifications by product form
| Product form | Grades |
|---|---|
| Forged flanges & fittings | ASTM A182 F304, ASTM A182 F304L, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F321, ASTM A182 F304H, ASTM A182 F316H, ASTM A182 F316Ti, ASTM A182 F317L, ASTM A182 F310, ASTM A182 F321H, ASTM A182 F347, ASTM A182 F347H |
| Seamless pipe (seamless & welded) | ASTM A312 TP304, ASTM A312 TP304L, ASTM A312 TP316, ASTM A312 TP316L |
| Wrought butt-weld fittings | ASTM A403 WP304, ASTM A403 WP304L, ASTM A403 WP316, ASTM A403 WP316L, ASTM A403 WP321, ASTM A403 WP347, ASTM A403 WP310S, ASTM A403 WP317L |
| Austenitic steel castings | ASTM A351 CF8M, ASTM A351 CF8, ASTM A351 CF3M |
| Seamless & welded pipe | ASTM A312 TP304H, ASTM A312 TP316H, ASTM A312 TP321, ASTM A312 TP347, ASTM A312 TP310S, ASTM A312 TP317L |
Where austenitic stainless steel is used
- Chemical, pharmaceutical and food processing
- Cryogenic LNG and air-separation plants
- Refinery and petrochemical process lines
- Water treatment and desalination pre-treatment
- High-temperature furnace and heater piping (H, 321, 347, 310 grades)
Welding and fabrication
Austenitic grades weld readily with matching consumables (308L, 316L, 347, 309/310). Use L or stabilised grades for welded equipment that must resist intergranular corrosion. They are prone to chloride stress-corrosion cracking above about 60 °C — duplex or super austenitic grades are preferred there. Dual-certified material (e.g. 316/316L) is common.
FAQ
Austenitic stainless steel: common questions
What is the difference between 316 and 316L?
316L has carbon 0.030 % max against 0.08 % for 316. The lower carbon prevents chromium-carbide precipitation in weld heat-affected zones, so 316L keeps its corrosion resistance after welding. 316L has slightly lower minimum strength (170 vs 205 MPa yield); dual-certified 316/316L meets both.
When should I use 321 or 347 instead of 304L?
For service between about 425 °C and 815 °C, where low-carbon grades lose strength and plain grades sensitise. Titanium (321) or niobium (347) stabilises the carbon.
What are H grades used for?
304H, 316H, 321H and 347H have controlled 0.04–0.10 % carbon and a coarse grain size for higher creep strength above about 525 °C.
Is austenitic stainless steel magnetic?
Not in the annealed condition. Cold work can make 304 and 316 slightly magnetic.
Austenitic SS products from Teshi Group
Austenitic Stainless Steel Flanges & Fittings — 304L to 310S
Grades, sizes and standards we supply
ViewMaterial productsSS 304 / 304L Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 316 / 316L Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 321 / 347 Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 304 / 304L Pipe Fittings
Grades, sizes and standards we supply
ViewMaterial productsSS 316 / 316L Pipe Fittings
Grades, sizes and standards we supply
ViewOEM manufacturerIndustrial Flanges
ViewOEM manufacturerButt Weld Fittings
ViewOEM manufacturerSocket Weld Fittings
ViewStockist & supplierIndustrial Pipes
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.