ASTM A182 F316Ti — Chemical Composition & Mechanical Properties
ASTM A182 F316Ti is a austenitic stainless steel grade for forged flanges & fittings (UNS S31635, EN / W.Nr 1.4571). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.
ASTM A182 F316Ti at a glance
| Specification | ASTM A182 F316Ti |
|---|---|
| Material family | Austenitic stainless steel |
| Product form | Forged flanges & fittings |
| UNS number | S31635 |
| EN / W.Nr equivalent | 1.4571 |
| Also known as | 316Ti |
| PREN (min values) | 22.6 |
| Document | TG-MG-049 · Rev. 1 · October 2026 |
Typical service
Titanium-stabilised 316 for welded equipment exposed to sensitising temperatures
Heat treatment
Solution annealed 1040 °C min, rapid cool
Chemical composition of ASTM A182 F316Ti (weight %)
Other elements and limits: Ti 5×(C+N) min, 0.70 max
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 515 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 205 MPa |
| Elongation, min | 30 % |
| Hardness | Not specified |
About austenitic stainless steel
Austenitic stainless steels are iron–chromium–nickel alloys with 16–26 % chromium and 8–22 % nickel. Nickel keeps the structure austenitic (face-centred cubic), which makes these steels non-magnetic when annealed, very tough down to cryogenic temperatures, and easy to form and weld.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of ASTM A182 F316Ti
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — ASTM / ASME | ASTM A182 F316Ti · ASME SA-182 F316Ti |
| USA — UNS | S31635 |
| Europe — EN designation | X6CrNiMoTi17-12-2 |
| Europe — W.Nr | 1.4571 |
| Japan — JIS | SUS316Ti |
| China — GB / NB | S31668 (06Cr17Ni12Mo2Ti) |
| China — old GB designation | 0Cr18Ni12Mo3Ti |
| India — IS | X04Cr17Ni12Mo2Ti (IS 6911) |
| UK — BS (withdrawn) | 320S31 |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Standards for ASTM A182 F316Ti
All material standardsFAQ
ASTM A182 F316Ti: common questions
What is the minimum yield strength of ASTM A182 F316Ti?
205 MPa, with a minimum tensile strength of 515 MPa.
What is the carbon content of ASTM A182 F316Ti?
0.08 max %.
What is the PREN of ASTM A182 F316Ti?
About 23, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.
What is the UNS number and EN equivalent of ASTM A182 F316Ti?
UNS S31635; the nearest European designation is W.Nr 1.4571. Equivalents are close but not identical — check the specification if substituting.
How is ASTM A182 F316Ti heat treated?
Solution annealed 1040 °C min, rapid cool.
What is the Chinese (GB) equivalent of ASTM A182 F316Ti?
The nearest Chinese equivalent is S31668 (06Cr17Ni12Mo2Ti), formerly 0Cr18Ni12Mo3Ti. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of ASTM A182 F316Ti?
The nearest Japanese (JIS) equivalent is SUS316Ti.
Does Teshi Group supply ASTM A182 F316Ti?
Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Weld Neck Flange
OEM manufacturer
View online · PDFTechnical data sheetSlip-On Flange
OEM manufacturer
View online · PDFTechnical data sheetBlind Flange
OEM manufacturer
View online · PDFTechnical data sheetSocket Weld Flange
OEM manufacturer
View online · PDFTechnical data sheetThreaded Flange
OEM manufacturer
View online · PDFTechnical data sheetLap Joint Flange
OEM manufacturer
View online · PDFMaterial productsAustenitic Stainless Steel Flanges & Fittings — 304L to 310S
Grades, sizes and standards we supply
ViewMaterial productsSS 304 / 304L Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 316 / 316L Flanges
Grades, sizes and standards we supply
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.