ASTM A351 CF3M — Chemical Composition & Mechanical Properties
ASTM A351 CF3M is a austenitic stainless steel grade for austenitic steel castings (UNS J92800, EN / W.Nr 1.4409). It is also known as Cast 316L. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures valves with bodies in this grade.
ASTM A351 CF3M at a glance
| Specification | ASTM A351 CF3M |
|---|---|
| Material family | Austenitic stainless steel |
| Product form | Austenitic steel castings |
| UNS number | J92800 |
| EN / W.Nr equivalent | 1.4409 |
| Also known as | Cast 316L |
| PREN (min values) | 23.6 |
| Document | TG-MG-066 · Rev. 1 · October 2026 |
Typical service
Cast equivalent of 316L — welded valve bodies
Heat treatment
Solution treated 1040 °C min, quenched
Chemical composition of ASTM A351 CF3M (weight %)
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 485 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 205 MPa |
| Elongation, min | 30 % |
| Hardness | Not specified |
About austenitic stainless steel
Austenitic stainless steels are iron–chromium–nickel alloys with 16–26 % chromium and 8–22 % nickel. Nickel keeps the structure austenitic (face-centred cubic), which makes these steels non-magnetic when annealed, very tough down to cryogenic temperatures, and easy to form and weld.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of ASTM A351 CF3M
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — ASTM / ASME | ASTM A351 CF3M · ASME SA-351 CF3M |
| USA — UNS | J92800 |
| Europe — EN designation | GX2CrNiMo19-11-2 (EN 10213) |
| Europe — W.Nr | 1.4409 |
| Japan — JIS | SCS16A (JIS G5121) |
| China — GB / NB | CF3M / ZG03Cr18Ni12Mo2 (GB/T 12230) |
| China — old GB designation | ZG00Cr17Ni14Mo2 |
| UK — BS (withdrawn) | BS 3100 316C12 |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Standards for ASTM A351 CF3M
All material standardsFAQ
ASTM A351 CF3M: common questions
What is the minimum yield strength of ASTM A351 CF3M?
205 MPa, with a minimum tensile strength of 485 MPa.
What is the carbon content of ASTM A351 CF3M?
0.03 max %.
What is the PREN of ASTM A351 CF3M?
About 24, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.
What is the UNS number and EN equivalent of ASTM A351 CF3M?
UNS J92800; the nearest European designation is W.Nr 1.4409. Equivalents are close but not identical — check the specification if substituting.
How is ASTM A351 CF3M heat treated?
Solution treated 1040 °C min, quenched.
What is the Chinese (GB) equivalent of ASTM A351 CF3M?
The nearest Chinese equivalent is CF3M / ZG03Cr18Ni12Mo2 (GB/T 12230), formerly ZG00Cr17Ni14Mo2. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of ASTM A351 CF3M?
The nearest Japanese (JIS) equivalent is SCS16A (JIS G5121).
Does Teshi Group supply ASTM A351 CF3M?
Teshi Group manufactures valves with bodies in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Gate Valve
OEM manufacturer
View online · PDFTechnical data sheetGlobe Valve
OEM manufacturer
View online · PDFTechnical data sheetCheck Valve
OEM manufacturer
View online · PDFTechnical data sheetBall Valve
OEM manufacturer
View online · PDFMaterial productsAustenitic Stainless Steel Flanges & Fittings — 304L to 310S
Grades, sizes and standards we supply
ViewMaterial productsSS 304 / 304L Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 316 / 316L Flanges
Grades, sizes and standards we supply
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.