ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Material family2 grade data sheets

Copper-nickel grades — 90/10 (C70600) and 70/30 (C71500)

Copper-nickel (cupro-nickel) alloys combine good seawater corrosion resistance with natural resistance to biofouling. They are the traditional piping material for ship seawater systems, offshore firewater and desalination.

What copper-nickel (cu-ni) is

90/10 (UNS C70600, CuNi10Fe1Mn) is the most common. 70/30 (UNS C71500, CuNi30Mn1Fe) has higher strength and tolerates higher flow velocities. Pipe is to ASTM B466/B467 or EEMUA 144, flanges to EEMUA 145 and fittings to EEMUA 146.

  • Nickel 9–11 % (90/10) or 29–33 % (70/30)
  • Iron 1.0–1.8 % (90/10) for erosion-corrosion resistance
  • Manganese up to 1 %
  • Low lead and sulphur for weldability

Key properties

90/10 tensile / yield, min (annealed)262 / 103 MPa
70/30 tensile / yield, min (annealed)359 / 124 MPa
Design seawater velocity (90/10)About 3.5 m/s max in pipe
Biofouling resistanceHigh — reduces marine growth

Copper-nickel (Cu-Ni) grades compared

Chemistry and minimum room-temperature properties from the governing ASTM / ASME / API specifications. Open any grade for its full data sheet and PDF.

GradeFormUNSCr%Ni%Mo%C%YieldMPa minTensileMPa min
Copper-Nickel 90/10 (UNS C70600)Cu-Ni pipe, fittings & flangesC70600—9.0–11.0——90262
Copper-Nickel 70/30 (UNS C71500)Cu-Ni pipe, fittings & flangesC71500—29.0–33.0——124359

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

Specifications by product form

Product formGrades
Cu-Ni pipe, fittings & flangesCopper-Nickel 90/10 (UNS C70600), Copper-Nickel 70/30 (UNS C71500)

Where copper-nickel (cu-ni) is used

  • Ship and naval seawater systems
  • Offshore firewater and cooling water
  • Desalination and condensers
  • Seawater intakes and hydraulic lines

Welding and fabrication

Cu-Ni is welded by GTAW/GMAW with 70/30 consumables (ERCuNi). Clean thoroughly and avoid sulphide-polluted water during commissioning — a protective film forms over the first weeks in clean, aerated seawater.

FAQ

Copper-nickel (Cu-Ni): common questions

What is the difference between 90/10 and 70/30 copper-nickel?

70/30 has three times the nickel, making it stronger and more resistant to erosion at high flow velocities. 90/10 is cheaper, conducts heat better and is the usual choice for seawater piping.

What are EEMUA 145 flanges?

EEMUA 145 is the dimensional standard for 90/10 copper-nickel flanges used with EEMUA 144 pipe in offshore and marine systems.

Is copper-nickel the same as cupro-nickel?

Yes. Both terms describe the same copper–nickel alloys, such as C70600 (90/10) and C71500 (70/30).

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.