Copper-Nickel 90/10 (UNS C70600) — Chemical Composition & Mechanical Properties
Copper-Nickel 90/10 (UNS C70600) is a copper-nickel (cu-ni) grade for cu-ni pipe, fittings & flanges (UNS C70600, EN / W.Nr CW352H (2.0872)). It is also known as CuNi10Fe1Mn. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings.
Copper-Nickel 90/10 (UNS C70600) at a glance
| Specification | Copper-Nickel 90/10 (UNS C70600) |
|---|---|
| Material family | Copper-nickel (Cu-Ni) |
| Product form | Cu-Ni pipe, fittings & flanges |
| UNS number | C70600 |
| EN / W.Nr equivalent | CW352H (2.0872) |
| Also known as | CuNi10Fe1Mn |
| Document | TG-MG-097 · Rev. 1 · October 2026 |
Typical service
Seawater cooling, firewater, ship and offshore piping
Heat treatment
Annealed (O60, soft anneal)
Chemical composition of Copper-Nickel 90/10 (UNS C70600) (weight %)
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 262 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 90 MPa |
| Hardness | Not specified |
About copper-nickel (cu-ni)
Copper-nickel (cupro-nickel) alloys combine good seawater corrosion resistance with natural resistance to biofouling. They are the traditional piping material for ship seawater systems, offshore firewater and desalination.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of Copper-Nickel 90/10 (UNS C70600)
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — specification | Copper-Nickel 90/10 (UNS C70600) |
| USA — UNS | C70600 |
| Europe — EN designation | CuNi10Fe1Mn (EN 12449) |
| Europe — W.Nr | CW352H (2.0872) |
| Japan — JIS | C7060 (JIS H3300) |
| China — GB / NB | BFe10-1-1 (GB/T 8890) |
| China — old GB designation | BFe10-1-1 |
| UK — BS (withdrawn) | CN102 |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Same alloy in other product forms
| Product form | Specification / grade |
|---|---|
| Seamless pipe | ASTM B466 C70600 |
| Welded pipe | ASTM B467 C70600 |
| Flanges | EEMUA 145 / ASTM B151 bar |
| Butt-weld fittings | EEMUA 146 / ASTM B466-based |
| Plate | ASTM B171 C70600 |
Other copper-nickel (cu-ni) grades
Copper-nickel (Cu-Ni) overviewStandards for Copper-Nickel 90/10 (UNS C70600)
All material standardsFAQ
Copper-Nickel 90/10 (UNS C70600): common questions
What is the minimum yield strength of Copper-Nickel 90/10 (UNS C70600)?
90 MPa, with a minimum tensile strength of 262 MPa.
What is the UNS number and EN equivalent of Copper-Nickel 90/10 (UNS C70600)?
UNS C70600; the nearest European designation is W.Nr CW352H (2.0872). Equivalents are close but not identical — check the specification if substituting.
How is Copper-Nickel 90/10 (UNS C70600) heat treated?
Annealed (O60, soft anneal).
What is the Chinese (GB) equivalent of Copper-Nickel 90/10 (UNS C70600)?
The nearest Chinese equivalent is BFe10-1-1 (GB/T 8890), formerly BFe10-1-1. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of Copper-Nickel 90/10 (UNS C70600)?
The nearest Japanese (JIS) equivalent is C7060 (JIS H3300).
Does Teshi Group supply Copper-Nickel 90/10 (UNS C70600)?
Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Stainless Steel Pipe
Stockist & supplier
View online · PDFTechnical data sheetWeld Neck Flange
OEM manufacturer
View online · PDFTechnical data sheetButt Weld Elbow
OEM manufacturer
View online · PDFMaterial productsCopper-Nickel 90/10 & 70/30 Flanges & Fittings for Marine Piping
Grades, sizes and standards we supply
ViewMaterial productsCupro-Nickel 90/10 & 70/30 Flanges
Grades, sizes and standards we supply
ViewMaterial productsCupro-Nickel 90/10 & 70/30 Pipe Fittings
Grades, sizes and standards we supply
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.