ASTM A312 TP310S — Chemical Composition & Mechanical Properties
ASTM A312 TP310S is a austenitic stainless steel grade for seamless & welded pipe (UNS S31008, EN / W.Nr 1.4845). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings.
ASTM A312 TP310S at a glance
| Specification | ASTM A312 TP310S |
|---|---|
| Material family | Austenitic stainless steel |
| Product form | Seamless & welded pipe |
| UNS number | S31008 |
| EN / W.Nr equivalent | 1.4845 |
| Also known as | 310S |
| PREN (min values) | 24.0 |
| Document | TG-MG-059 · Rev. 1 · October 2026 |
Typical service
High-temperature and oxidising service
Heat treatment
Solution annealed 1040 °C min, rapid cool
Chemical composition of ASTM A312 TP310S (weight %)
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 515 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 205 MPa |
| Elongation, min | 35 % |
| Hardness | Not specified |
About austenitic stainless steel
Austenitic stainless steels are iron–chromium–nickel alloys with 16–26 % chromium and 8–22 % nickel. Nickel keeps the structure austenitic (face-centred cubic), which makes these steels non-magnetic when annealed, very tough down to cryogenic temperatures, and easy to form and weld.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of ASTM A312 TP310S
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — ASTM / ASME | ASTM A312 TP310S · ASME SA-312 TP310S |
| USA — UNS | S31008 |
| Europe — EN designation | X8CrNi25-21 |
| Europe — W.Nr | 1.4845 |
| Japan — JIS | SUS310S |
| China — GB / NB | S31008 (06Cr25Ni20) |
| China — old GB designation | 0Cr25Ni20 |
| India — IS | X04Cr25Ni20 (IS 6911) |
| UK — BS (withdrawn) | 310S16 |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Same alloy in other product forms
| Product form | Specification / grade |
|---|---|
| Wrought butt-weld fittings | ASTM A403 WP310S |
Standards for ASTM A312 TP310S
All material standardsFAQ
ASTM A312 TP310S: common questions
What is the minimum yield strength of ASTM A312 TP310S?
205 MPa, with a minimum tensile strength of 515 MPa.
What is the carbon content of ASTM A312 TP310S?
0.08 max %.
What is the PREN of ASTM A312 TP310S?
About 24, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.
What is the UNS number and EN equivalent of ASTM A312 TP310S?
UNS S31008; the nearest European designation is W.Nr 1.4845. Equivalents are close but not identical — check the specification if substituting.
How is ASTM A312 TP310S heat treated?
Solution annealed 1040 °C min, rapid cool.
What is the Chinese (GB) equivalent of ASTM A312 TP310S?
The nearest Chinese equivalent is S31008 (06Cr25Ni20), formerly 0Cr25Ni20. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of ASTM A312 TP310S?
The nearest Japanese (JIS) equivalent is SUS310S.
Does Teshi Group supply ASTM A312 TP310S?
Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Stainless Steel Pipe
Stockist & supplier
View online · PDFTechnical data sheetWeld Neck Flange
OEM manufacturer
View online · PDFTechnical data sheetButt Weld Elbow
OEM manufacturer
View online · PDFMaterial productsAustenitic Stainless Steel Flanges & Fittings — 304L to 310S
Grades, sizes and standards we supply
ViewMaterial productsSS 304 / 304L Flanges
Grades, sizes and standards we supply
ViewMaterial productsSS 316 / 316L Flanges
Grades, sizes and standards we supply
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.