8 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions
8 NB to IS 1239-2: Min outside diameter 18.5 mm; Min length 27 mm; Max inside dia of internal parallel thread 11.549 mm.
Key to dimensions
- A
- Centre to face (elbows, tees) — see each table for its own lettering
8 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions
IS 1239-2 Table 6 — steel (mild steel) sockets (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Min outside diameter | 18.5 mm | 0.728 in |
| Min length | 27 mm | 1.06 in |
| Max inside dia of internal parallel thread | 11.549 mm | 0.455 in |
IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Min length, centre to face | 22 mm | 0.866 in |
IS 1239-2 Table 4 — bends 90° and springs (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Bend 90° A approx centre to face | 64 mm | 2.52 in |
| B | 92 mm | 3.62 in |
| R approx radius | 41 mm | 1.61 in |
| Spring 112.5° C centre to face | 60 mm | 2.36 in |
| Spring 135° D | 57 mm | 2.24 in |
| Spring 157.5° E | 54 mm | 2.13 in |
IS 1239-2 Table 5 — return bends (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| A approx centre to centre | 51 mm | 2.01 in |
| B approx back to face | 64 mm | 2.52 in |
IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Running nipple A | 19 mm | 0.748 in |
| Close taper nipple B | 27 mm | 1.06 in |
| Barrel nipple C | 38 mm | 1.50 in |
IS 1239-2 Table 28 — hexagon nipples, equal (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| L basic gauge length + clearance | 12.5 mm | 0.492 in |
| T hexagon thickness | 6 mm | 0.236 in |
| A min overall length | 31 mm | 1.22 in |
| C max bore | 6.5 mm | 0.256 in |
| B width across flats | 15.5 mm | 0.610 in |
Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — IS 1239 Part 2 Steel Pipe Fitting Dimensions
Related for this size
¼" ASME B16.11 Socket Weld Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.11¼" ASME B16.11 Threaded Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M¼" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
8 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions
What are the 8 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?
8 NB to IS 1239-2: Min outside diameter 18.5 mm; Min length 27 mm; Max inside dia of internal parallel thread 11.549 mm.
Does Teshi Group manufacture 8 NB forged fittings?
Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 8 NB dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.
Need 8 NB forged fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.