ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

50 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

50 NB to IS 1239-2: Min outside diameter 68 mm; Min length 60 mm; Max inside dia of internal parallel thread 56.836 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

50 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter68 mm2.68 in
Min length60 mm2.36 in
Max inside dia of internal parallel thread56.836 mm2.24 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face64 mm2.52 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face203 mm7.99 in
B264 mm10.39 in
R approx radius159 mm6.26 in
Spring 112.5° C centre to face181 mm7.13 in
Spring 135° D175 mm6.89 in
Spring 157.5° E168 mm6.61 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre190 mm7.48 in
B approx back to face210 mm8.27 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A48 mm1.89 in
Close taper nipple B60 mm2.36 in
Barrel nipple C79 mm3.11 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance27 mm1.06 in
T hexagon thickness14 mm0.551 in
A min overall length68 mm2.68 in
C max bore51 mm2.01 in
B width across flats61.1 mm2.41 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

50 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 50 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

50 NB to IS 1239-2: Min outside diameter 68 mm; Min length 60 mm; Max inside dia of internal parallel thread 56.836 mm.

Does Teshi Group manufacture 50 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 50 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 50 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote