ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

100 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

100 NB to IS 1239-2: Min outside diameter 124 mm; Min length 87 mm; Max inside dia of internal parallel thread 110.228 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

100 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter124 mm4.88 in
Min length87 mm3.43 in
Max inside dia of internal parallel thread110.228 mm4.34 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face115 mm4.53 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face381 mm15.00 in
B467 mm18.39 in
R approx radius308 mm12.13 in
Spring 112.5° C centre to face340 mm13.39 in
Spring 135° D324 mm12.76 in
Spring 157.5° E318 mm12.52 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre457 mm17.99 in
B approx back to face400 mm15.75 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A70 mm2.76 in
Close taper nipple B87 mm3.43 in
Barrel nipple C114 mm4.49 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance40 mm1.57 in
T hexagon thickness22 mm0.866 in
A min overall length102 mm4.02 in
C max bore100 mm3.94 in
B width across flats117 mm4.61 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

100 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 100 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

100 NB to IS 1239-2: Min outside diameter 124 mm; Min length 87 mm; Max inside dia of internal parallel thread 110.228 mm.

Does Teshi Group manufacture 100 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 100 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 100 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote