ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

20 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

20 NB to IS 1239-2: Min outside diameter 32.5 mm; Min length 39 mm; Max inside dia of internal parallel thread 24.259 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

20 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter32.5 mm1.28 in
Min length39 mm1.54 in
Max inside dia of internal parallel thread24.259 mm0.955 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face35 mm1.38 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face102 mm4.02 in
B143 mm5.63 in
R approx radius73 mm2.87 in
Spring 112.5° C centre to face92 mm3.62 in
Spring 135° D89 mm3.50 in
Spring 157.5° E86 mm3.39 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre102 mm4.02 in
B approx back to face121 mm4.76 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A30 mm1.18 in
Close taper nipple B39 mm1.54 in
Barrel nipple C54 mm2.13 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance19 mm0.748 in
T hexagon thickness10 mm0.394 in
A min overall length48 mm1.89 in
C max bore19 mm0.748 in
B width across flats27.8 mm1.09 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

20 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 20 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

20 NB to IS 1239-2: Min outside diameter 32.5 mm; Min length 39 mm; Max inside dia of internal parallel thread 24.259 mm.

Does Teshi Group manufacture 20 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 20 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 20 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote