ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

6 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

6 NB to IS 1239-2: Min outside diameter 15 mm; Min length 19 mm; Max inside dia of internal parallel thread 8.637 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

6 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter15 mm0.591 in
Min length19 mm0.748 in
Max inside dia of internal parallel thread8.637 mm0.340 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face16 mm0.630 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face51 mm2.01 in
B73 mm2.87 in
R approx radius32 mm1.26 in
Spring 112.5° C centre to face48 mm1.89 in
Spring 135° D44 mm1.73 in
Spring 157.5° E44 mm1.73 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre44 mm1.73 in
B approx back to face51 mm2.01 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A13 mm0.512 in
Close taper nipple B19 mm0.748 in
Barrel nipple C32 mm1.26 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance9.5 mm0.374 in
T hexagon thickness6 mm0.236 in
A min overall length25 mm0.984 in
C max bore5.5 mm0.217 in
B width across flats13.1 mm0.516 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

6 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 6 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

6 NB to IS 1239-2: Min outside diameter 15 mm; Min length 19 mm; Max inside dia of internal parallel thread 8.637 mm.

Does Teshi Group manufacture 6 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 6 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 6 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote