ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

32 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

32 NB to IS 1239-2: Min outside diameter 49 mm; Min length 51 mm; Max inside dia of internal parallel thread 39.132 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

32 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter49 mm1.93 in
Min length51 mm2.01 in
Max inside dia of internal parallel thread39.132 mm1.54 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face51 mm2.01 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face146 mm5.75 in
B197 mm7.76 in
R approx radius108 mm4.25 in
Spring 112.5° C centre to face133 mm5.24 in
Spring 135° D127 mm5.00 in
Spring 157.5° E124 mm4.88 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre127 mm5.00 in
B approx back to face152 mm5.98 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A38 mm1.50 in
Close taper nipple B51 mm2.01 in
Barrel nipple C70 mm2.76 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance24 mm0.945 in
T hexagon thickness11 mm0.433 in
A min overall length59 mm2.32 in
C max bore32 mm1.26 in
B width across flats47.2 mm1.86 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

32 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 32 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

32 NB to IS 1239-2: Min outside diameter 49 mm; Min length 51 mm; Max inside dia of internal parallel thread 39.132 mm.

Does Teshi Group manufacture 32 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 32 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 32 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote