ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1239-2Forged fittingsTG-DS-083 · size page

25 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions

25 NB to IS 1239-2: Min outside diameter 39.5 mm; Min length 46 mm; Max inside dia of internal parallel thread 30.471 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Threaded fitting dimension drawing showing centre-to-end A, band diameter H and thread length BAScrewed elbow / tee — centre-to-face A (not to scale)

Key to dimensions

A
Centre to face (elbows, tees) — see each table for its own lettering

25 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions

IS 1239-2 Table 6 — steel (mild steel) sockets (mm)

DimensionValueEquivalent
Min outside diameter39.5 mm1.56 in
Min length46 mm1.81 in
Max inside dia of internal parallel thread30.471 mm1.20 in

IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)

DimensionValueEquivalent
Min length, centre to face43 mm1.69 in

IS 1239-2 Table 4 — bends 90° and springs (mm)

DimensionValueEquivalent
Bend 90° A approx centre to face121 mm4.76 in
B168 mm6.61 in
R approx radius89 mm3.50 in
Spring 112.5° C centre to face108 mm4.25 in
Spring 135° D105 mm4.13 in
Spring 157.5° E102 mm4.02 in

IS 1239-2 Table 5 — return bends (mm)

DimensionValueEquivalent
A approx centre to centre114 mm4.49 in
B approx back to face140 mm5.51 in

IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)

DimensionValueEquivalent
Running nipple A33 mm1.30 in
Close taper nipple B46 mm1.81 in
Barrel nipple C60 mm2.36 in

IS 1239-2 Table 28 — hexagon nipples, equal (mm)

DimensionValueEquivalent
L basic gauge length + clearance21 mm0.827 in
A min overall length52 mm2.05 in
C max bore25 mm0.984 in
B width across flats35.3 mm1.39 in

Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

25 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions

What are the 25 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?

25 NB to IS 1239-2: Min outside diameter 39.5 mm; Min length 46 mm; Max inside dia of internal parallel thread 30.471 mm.

Does Teshi Group manufacture 25 NB forged fittings?

Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 25 NB dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.

Need 25 NB forged fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote