10 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions
10 NB to IS 1239-2: Min outside diameter 22 mm; Min length 28 mm; Max inside dia of internal parallel thread 15.054 mm.
Key to dimensions
- A
- Centre to face (elbows, tees) — see each table for its own lettering
10 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions — all dimensions
IS 1239-2 Table 6 — steel (mild steel) sockets (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Min outside diameter | 22 mm | 0.866 in |
| Min length | 28 mm | 1.10 in |
| Max inside dia of internal parallel thread | 15.054 mm | 0.593 in |
IS 1239-2 Table 8 — elbows, tees and crosses, equal (screwed) (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Min length, centre to face | 24 mm | 0.945 in |
IS 1239-2 Table 4 — bends 90° and springs (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Bend 90° A approx centre to face | 73 mm | 2.87 in |
| B | 105 mm | 4.13 in |
| R approx radius | 48 mm | 1.89 in |
| Spring 112.5° C centre to face | 67 mm | 2.64 in |
| Spring 135° D | 64 mm | 2.52 in |
| Spring 157.5° E | 60 mm | 2.36 in |
IS 1239-2 Table 5 — return bends (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| A approx centre to centre | 64 mm | 2.52 in |
| B approx back to face | 70 mm | 2.76 in |
IS 1239-2 Table 2 — running, close taper and barrel nipples (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Running nipple A | 21 mm | 0.827 in |
| Close taper nipple B | 28 mm | 1.10 in |
| Barrel nipple C | 38 mm | 1.50 in |
IS 1239-2 Table 28 — hexagon nipples, equal (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| L basic gauge length + clearance | 12.5 mm | 0.492 in |
| T hexagon thickness | 8 mm | 0.315 in |
| A min overall length | 33 mm | 1.30 in |
| C max bore | 9.5 mm | 0.374 in |
| B width across flats | 17.9 mm | 0.705 in |
Values are nominal, from IS 1239 Part 2 Steel Pipe Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — IS 1239 Part 2 Steel Pipe Fitting Dimensions
Related for this size
⅜" ASME B16.11 Socket Weld Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.11⅜" ASME B16.11 Threaded Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M⅜" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
10 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions: common questions
What are the 10 NB IS 1239 Part 2 Steel Pipe Fitting Dimensions?
10 NB to IS 1239-2: Min outside diameter 22 mm; Min length 28 mm; Max inside dia of internal parallel thread 15.054 mm.
Does Teshi Group manufacture 10 NB forged fittings?
Yes. Teshi Group is an OEM manufacturer in India of forged fittings to IS 1239-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 10 NB dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1239 Part 2 Steel Pipe Fitting Dimensions chart.
Need 10 NB forged fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.