ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Nickel alloysNickel alloy forgings, fittings & pipeTG-MG-089 · Rev. 1 · October 2026

Alloy C-276 (UNS N10276) — Chemical Composition & Mechanical Properties

Alloy C-276 (UNS N10276) is a nickel alloys grade for nickel alloy forgings, fittings & pipe (UNS N10276, EN / W.Nr 2.4819). It is also known as Hastelloy C-276 (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-089 · © Teshi Group · controlled document

Alloy C-276 (UNS N10276) at a glance

SpecificationAlloy C-276 (UNS N10276)
Material familyNickel alloys
Product formNickel alloy forgings, fittings & pipe
UNS numberN10276
EN / W.Nr equivalent2.4819
Also known asHastelloy C-276 (trade name)
PREN (min values)68.9
DocumentTG-MG-089 · Rev. 1 · October 2026

Typical service

Wet chlorine, FGD scrubbers, hydrochloric and mixed acids

Heat treatment

Solution annealed 1120 °C min, rapid cool

Chemical composition of Alloy C-276 (UNS N10276) (weight %)

Nibalance
Mo15.0–17.0
Cr14.5–16.5
W3.0–4.5
Fe4.0–7.0
Co2.5 max
C0.010 max
Mn1.0 max
Si0.08 max
P0.04 max
S0.03 max
V0.35 max

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min690 MPa
Yield strength (0.2 % offset), min283 MPa
Elongation, min40 %
HardnessNot specified

About nickel alloys

Nickel alloys are used where stainless steels run out of corrosion or temperature resistance. With 30–99 % nickel and additions of chromium, molybdenum, copper or tungsten, they resist strong acids, chlorides, caustics and oxidation from cryogenic temperatures to above 1000 °C.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of Alloy C-276 (UNS N10276)

All equivalents
Standard systemNearest equivalent grade
USA — specificationAlloy C-276 (UNS N10276)
USA — UNSN10276
Europe — EN designationNiMo16Cr15W
Europe — W.Nr2.4819
Japan — JISNW0276
China — GB / NBNS3304 (GB/T 15007)
China — old GB designation00Cr16Ni60Mo16W4

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Flanges & forged fittingsASTM B564 N10276
Butt-weld fittingsASTM B366 WPHC276
Seamless pipeASTM B622 N10276
Welded pipeASTM B619 N10276
PlateASTM B575 N10276
BarASTM B574 N10276

FAQ

Alloy C-276 (UNS N10276): common questions

What is the minimum yield strength of Alloy C-276 (UNS N10276)?

283 MPa, with a minimum tensile strength of 690 MPa.

What is the carbon content of Alloy C-276 (UNS N10276)?

0.010 max %.

What is the PREN of Alloy C-276 (UNS N10276)?

About 69, calculated as Cr + 3.3Mo + 16N (+ 1.65W) using the specification minimum values. Typical heats are a little higher.

What is the UNS number and EN equivalent of Alloy C-276 (UNS N10276)?

UNS N10276; the nearest European designation is W.Nr 2.4819. Equivalents are close but not identical — check the specification if substituting.

How is Alloy C-276 (UNS N10276) heat treated?

Solution annealed 1120 °C min, rapid cool.

What is the Chinese (GB) equivalent of Alloy C-276 (UNS N10276)?

The nearest Chinese equivalent is NS3304 (GB/T 15007), formerly 00Cr16Ni60Mo16W4. Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of Alloy C-276 (UNS N10276)?

The nearest Japanese (JIS) equivalent is NW0276.

Does Teshi Group supply Alloy C-276 (UNS N10276)?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.