ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Nickel alloysNickel alloy forgings, fittings & pipeTG-MG-086 · Rev. 1 · October 2026

Alloy 600 (UNS N06600) — Chemical Composition & Mechanical Properties

Alloy 600 (UNS N06600) is a nickel alloys grade for nickel alloy forgings, fittings & pipe (UNS N06600, EN / W.Nr 2.4816). It is also known as Inconel 600 (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-086 · © Teshi Group · controlled document

Alloy 600 (UNS N06600) at a glance

SpecificationAlloy 600 (UNS N06600)
Material familyNickel alloys
Product formNickel alloy forgings, fittings & pipe
UNS numberN06600
EN / W.Nr equivalent2.4816
Also known asInconel 600 (trade name)
DocumentTG-MG-086 · Rev. 1 · October 2026

Typical service

Furnace components, chlorination, caustic and high-temperature service

Heat treatment

Annealed

Chemical composition of Alloy 600 (UNS N06600) (weight %)

Ni72.0 min
Cr14.0–17.0
Fe6.0–10.0
C0.15 max
Mn1.00 max
Si0.50 max
S0.015 max
Cu0.50 max

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min550 MPa
Yield strength (0.2 % offset), min240 MPa
Elongation, min30 %
HardnessNot specified

About nickel alloys

Nickel alloys are used where stainless steels run out of corrosion or temperature resistance. With 30–99 % nickel and additions of chromium, molybdenum, copper or tungsten, they resist strong acids, chlorides, caustics and oxidation from cryogenic temperatures to above 1000 °C.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of Alloy 600 (UNS N06600)

All equivalents
Standard systemNearest equivalent grade
USA — specificationAlloy 600 (UNS N06600)
USA — UNSN06600
Europe — EN designationNiCr15Fe
Europe — W.Nr2.4816
Japan — JISNCF600
China — GB / NBNS3102 (GB/T 15007)
China — old GB designation0Cr15Ni75Fe
UK — BS (withdrawn)NA14

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Flanges & forged fittingsASTM B564 N06600
Butt-weld fittingsASTM B366 WPNCI
Seamless pipeASTM B167 N06600
PlateASTM B168 N06600
BarASTM B166 N06600

FAQ

Alloy 600 (UNS N06600): common questions

What is the minimum yield strength of Alloy 600 (UNS N06600)?

240 MPa, with a minimum tensile strength of 550 MPa.

What is the carbon content of Alloy 600 (UNS N06600)?

0.15 max %.

What is the UNS number and EN equivalent of Alloy 600 (UNS N06600)?

UNS N06600; the nearest European designation is W.Nr 2.4816. Equivalents are close but not identical — check the specification if substituting.

How is Alloy 600 (UNS N06600) heat treated?

Annealed.

What is the Chinese (GB) equivalent of Alloy 600 (UNS N06600)?

The nearest Chinese equivalent is NS3102 (GB/T 15007), formerly 0Cr15Ni75Fe. Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of Alloy 600 (UNS N06600)?

The nearest Japanese (JIS) equivalent is NCF600.

Does Teshi Group supply Alloy 600 (UNS N06600)?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.