ASTM A182 F53 (Super Duplex 2507) — Chemical Composition & Mechanical Properties
ASTM A182 F53 (Super Duplex 2507) is a super duplex stainless steel grade for forged flanges & fittings (UNS S32750, EN / W.Nr 1.4410). It is also known as 2507 · SAF 2507 (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.
ASTM A182 F53 (Super Duplex 2507) at a glance
| Specification | ASTM A182 F53 (Super Duplex 2507) |
|---|---|
| Material family | Super duplex stainless steel |
| Product form | Forged flanges & fittings |
| UNS number | S32750 |
| EN / W.Nr equivalent | 1.4410 |
| Also known as | 2507 · SAF 2507 (trade name) |
| PREN (min values) | 37.7 |
| Document | TG-MG-077 · Rev. 1 · October 2026 |
Typical service
Seawater injection, firewater, subsea and desalination
Heat treatment
Solution annealed 1025–1125 °C, water quench
Chemical composition of ASTM A182 F53 (Super Duplex 2507) (weight %)
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 800 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 550 MPa |
| Elongation, min | 15 % |
| Hardness | 310 HBW max |
About super duplex stainless steel
Super duplex stainless steels raise chromium to 25 %, molybdenum to 3.5–4 % and nitrogen to about 0.25 %, giving a PREN above 40. That makes them resistant to pitting and crevice corrosion in warm seawater, while keeping a minimum yield of 550 MPa.
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of ASTM A182 F53 (Super Duplex 2507)
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — ASTM / ASME | ASTM A182 F53 (Super Duplex 2507) · ASME SA-182 F53 (Super Duplex 2507) |
| USA — UNS | S32750 |
| Europe — EN designation | X2CrNiMoN25-7-4 |
| Europe — W.Nr | 1.4410 |
| Japan — JIS | SUS327L1 |
| China — GB / NB | S25073 (022Cr25Ni7Mo4N) |
| China — old GB designation | 00Cr25Ni7Mo4N |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Same alloy in other product forms
| Product form | Specification / grade |
|---|---|
| Flanges & forged fittings | ASTM A182 F53 |
| Butt-weld fittings | ASTM A815 WPS32750 |
| Pipe | ASTM A790 / A928 S32750 |
| Plate | ASTM A240 S32750 |
| Bar | ASTM A479 S32750 |
Standards for ASTM A182 F53 (Super Duplex 2507)
All material standardsFAQ
ASTM A182 F53 (Super Duplex 2507): common questions
What is the minimum yield strength of ASTM A182 F53 (Super Duplex 2507)?
550 MPa, with a minimum tensile strength of 800 MPa.
What is the carbon content of ASTM A182 F53 (Super Duplex 2507)?
0.030 max %.
What is the PREN of ASTM A182 F53 (Super Duplex 2507)?
About 38, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.
What is the UNS number and EN equivalent of ASTM A182 F53 (Super Duplex 2507)?
UNS S32750; the nearest European designation is W.Nr 1.4410. Equivalents are close but not identical — check the specification if substituting.
How is ASTM A182 F53 (Super Duplex 2507) heat treated?
Solution annealed 1025–1125 °C, water quench.
What is the Chinese (GB) equivalent of ASTM A182 F53 (Super Duplex 2507)?
The nearest Chinese equivalent is S25073 (022Cr25Ni7Mo4N), formerly 00Cr25Ni7Mo4N. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of ASTM A182 F53 (Super Duplex 2507)?
The nearest Japanese (JIS) equivalent is SUS327L1.
Does Teshi Group supply ASTM A182 F53 (Super Duplex 2507)?
Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Weld Neck Flange
OEM manufacturer
View online · PDFTechnical data sheetSlip-On Flange
OEM manufacturer
View online · PDFTechnical data sheetBlind Flange
OEM manufacturer
View online · PDFTechnical data sheetSocket Weld Flange
OEM manufacturer
View online · PDFTechnical data sheetThreaded Flange
OEM manufacturer
View online · PDFTechnical data sheetLap Joint Flange
OEM manufacturer
View online · PDFMaterial productsSuper Duplex 2507 (F53) & UNS S32760 (F55) Flanges & Fittings
Grades, sizes and standards we supply
ViewMaterial productsSuper Duplex 2507 / S32760 (F53 / F55) Flanges
Grades, sizes and standards we supply
ViewMaterial productsSuper Duplex 2507 / S32760 Pipe Fittings
Grades, sizes and standards we supply
View
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.