ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Super duplexWrought butt-weld fittingsTG-MG-079 · Rev. 1 · October 2026

ASTM A815 WPS32750 — Chemical Composition & Mechanical Properties

ASTM A815 WPS32750 is a super duplex stainless steel grade for wrought butt-weld fittings (UNS S32750, EN / W.Nr 1.4410). It is also known as 2507. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-079 · © Teshi Group · controlled document

ASTM A815 WPS32750 at a glance

SpecificationASTM A815 WPS32750
Material familySuper duplex stainless steel
Product formWrought butt-weld fittings
UNS numberS32750
EN / W.Nr equivalent1.4410
Also known as2507
PREN (min values)37.7
DocumentTG-MG-079 · Rev. 1 · October 2026

Typical service

Super duplex butt-weld fittings

Heat treatment

Solution annealed 1025–1125 °C, water quench

Chemical composition of ASTM A815 WPS32750 (weight %)

C0.030 max
Mn1.20 max
P0.035 max
S0.020 max
Si0.80 max
Cr24.0–26.0
Ni6.0–8.0
Mo3.0–5.0
N0.24–0.32
Cu0.50 max

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min800 MPa
Yield strength (0.2 % offset), min550 MPa
Elongation, min15 %
Hardness310 HBW max

About super duplex stainless steel

Super duplex stainless steels raise chromium to 25 %, molybdenum to 3.5–4 % and nitrogen to about 0.25 %, giving a PREN above 40. That makes them resistant to pitting and crevice corrosion in warm seawater, while keeping a minimum yield of 550 MPa.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A815 WPS32750

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A815 WPS32750 · ASME SA-815 WPS32750
USA — UNSS32750
Europe — EN designationX2CrNiMoN25-7-4
Europe — W.Nr1.4410
Japan — JISSUS327L1
China — GB / NBS25073 (022Cr25Ni7Mo4N)
China — old GB designation00Cr25Ni7Mo4N

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Forged flanges & fittingsASTM A182 F53 (Super Duplex 2507)
Seamless & welded pipeASTM A790 UNS S32750

FAQ

ASTM A815 WPS32750: common questions

What is the minimum yield strength of ASTM A815 WPS32750?

550 MPa, with a minimum tensile strength of 800 MPa.

What is the carbon content of ASTM A815 WPS32750?

0.030 max %.

What is the PREN of ASTM A815 WPS32750?

About 38, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.

What is the UNS number and EN equivalent of ASTM A815 WPS32750?

UNS S32750; the nearest European designation is W.Nr 1.4410. Equivalents are close but not identical — check the specification if substituting.

How is ASTM A815 WPS32750 heat treated?

Solution annealed 1025–1125 °C, water quench.

What is the Chinese (GB) equivalent of ASTM A815 WPS32750?

The nearest Chinese equivalent is S25073 (022Cr25Ni7Mo4N), formerly 00Cr25Ni7Mo4N. Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of ASTM A815 WPS32750?

The nearest Japanese (JIS) equivalent is SUS327L1.

Does Teshi Group supply ASTM A815 WPS32750?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.