ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Super duplexWrought butt-weld fittingsTG-MG-080 · Rev. 1 · October 2026

ASTM A815 WPS32760 — Chemical Composition & Mechanical Properties

ASTM A815 WPS32760 is a super duplex stainless steel grade for wrought butt-weld fittings (UNS S32760, EN / W.Nr 1.4501). It is also known as Zeron 100 (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-080 · © Teshi Group · controlled document

ASTM A815 WPS32760 at a glance

SpecificationASTM A815 WPS32760
Material familySuper duplex stainless steel
Product formWrought butt-weld fittings
UNS numberS32760
EN / W.Nr equivalent1.4501
Also known asZeron 100 (trade name)
PREN (min values)37.9
DocumentTG-MG-080 · Rev. 1 · October 2026

Typical service

Super duplex butt-weld fittings

Heat treatment

Solution annealed 1100–1140 °C, water quench

Chemical composition of ASTM A815 WPS32760 (weight %)

C0.030 max
Mn1.00 max
P0.030 max
S0.010 max
Si1.00 max
Cr24.0–26.0
Ni6.0–8.0
Mo3.0–4.0
N0.20–0.30
Cu0.50–1.00

Other elements and limits: W 0.50–1.00; PREN (Cr+3.3Mo+16N) 40 min

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min750 MPa
Yield strength (0.2 % offset), min550 MPa
Elongation, min25 %
Hardness310 HBW max

About super duplex stainless steel

Super duplex stainless steels raise chromium to 25 %, molybdenum to 3.5–4 % and nitrogen to about 0.25 %, giving a PREN above 40. That makes them resistant to pitting and crevice corrosion in warm seawater, while keeping a minimum yield of 550 MPa.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A815 WPS32760

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A815 WPS32760 · ASME SA-815 WPS32760
USA — UNSS32760
Europe — EN designationX2CrNiMoCuWN25-7-4
Europe — W.Nr1.4501
China — GB / NBS27603 (022Cr25Ni7Mo4WCuN)

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Forged flanges & fittingsASTM A182 F55 (Super Duplex S32760)
Seamless & welded pipeASTM A790 UNS S32760

FAQ

ASTM A815 WPS32760: common questions

What is the minimum yield strength of ASTM A815 WPS32760?

550 MPa, with a minimum tensile strength of 750 MPa.

What is the carbon content of ASTM A815 WPS32760?

0.030 max %.

What is the PREN of ASTM A815 WPS32760?

About 38, calculated as Cr + 3.3Mo + 16N (+ 1.65W) using the specification minimum values. Typical heats are a little higher.

What is the UNS number and EN equivalent of ASTM A815 WPS32760?

UNS S32760; the nearest European designation is W.Nr 1.4501. Equivalents are close but not identical — check the specification if substituting.

How is ASTM A815 WPS32760 heat treated?

Solution annealed 1100–1140 °C, water quench.

What is the Chinese (GB) equivalent of ASTM A815 WPS32760?

The nearest Chinese equivalent is S27603 (022Cr25Ni7Mo4WCuN). Equivalents are close but not identical — compare chemistry and properties before substituting.

Does Teshi Group supply ASTM A815 WPS32760?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.