ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Super duplexSuper duplex steel castingsTG-MG-084 · Rev. 1 · October 2026

ASTM A995 Grade 6A (CD3MWCuN) — Chemical Composition & Mechanical Properties

ASTM A995 Grade 6A (CD3MWCuN) is a super duplex stainless steel grade for super duplex steel castings (UNS J93380, EN / W.Nr 1.4508). It is also known as Cast Zeron 100. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures valves with bodies in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-084 · © Teshi Group · controlled document

ASTM A995 Grade 6A (CD3MWCuN) at a glance

SpecificationASTM A995 Grade 6A (CD3MWCuN)
Material familySuper duplex stainless steel
Product formSuper duplex steel castings
UNS numberJ93380
EN / W.Nr equivalent1.4508
Also known asCast Zeron 100
PREN (min values)37.9
DocumentTG-MG-084 · Rev. 1 · October 2026

Typical service

Cast super duplex for seawater valves

Heat treatment

Solution treated 1100 °C min, water quench

Chemical composition of ASTM A995 Grade 6A (CD3MWCuN) (weight %)

C0.03 max
Mn1.00 max
P0.030 max
S0.025 max
Si1.00 max
Cr24.0–26.0
Ni6.5–8.5
Mo3.0–4.0
N0.20–0.30
Cu0.50–1.00

Other elements and limits: W 0.50–1.00

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min690 MPa
Yield strength (0.2 % offset), min450 MPa
Elongation, min25 %
HardnessNot specified

About super duplex stainless steel

Super duplex stainless steels raise chromium to 25 %, molybdenum to 3.5–4 % and nitrogen to about 0.25 %, giving a PREN above 40. That makes them resistant to pitting and crevice corrosion in warm seawater, while keeping a minimum yield of 550 MPa.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A995 Grade 6A (CD3MWCuN)

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A995 Grade 6A (CD3MWCuN) · ASME SA-995 Grade 6A (CD3MWCuN)
USA — UNSJ93380
Europe — EN designationGX2CrNiMoCuN25-6-3-3 (approx.)
Europe — W.Nr1.4517

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

FAQ

ASTM A995 Grade 6A (CD3MWCuN): common questions

What is the minimum yield strength of ASTM A995 Grade 6A (CD3MWCuN)?

450 MPa, with a minimum tensile strength of 690 MPa.

What is the carbon content of ASTM A995 Grade 6A (CD3MWCuN)?

0.03 max %.

What is the PREN of ASTM A995 Grade 6A (CD3MWCuN)?

About 38, calculated as Cr + 3.3Mo + 16N (+ 1.65W) using the specification minimum values. Typical heats are a little higher.

What is the UNS number and EN equivalent of ASTM A995 Grade 6A (CD3MWCuN)?

UNS J93380; the nearest European designation is W.Nr 1.4508. Equivalents are close but not identical — check the specification if substituting.

How is ASTM A995 Grade 6A (CD3MWCuN) heat treated?

Solution treated 1100 °C min, water quench.

Does Teshi Group supply ASTM A995 Grade 6A (CD3MWCuN)?

Teshi Group manufactures valves with bodies in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.