Stockist & supplier IS 2062 · ASTM A36 · ASME SA-36
Carbon Steel Plates — IS 2062 & ASTM A36
Carbon steel plate is flat hot-rolled steel for structural work, fabrication and general engineering. Teshi Group stocks and supplies IS 2062 E250 and E350 plate and ASTM A36 plate from integrated mills. Quotes are sent in 24–48 hours.
Also called: MS plate, mild steel plate, IS 2062 plate, A36 plate, structural steel plate
What is a Carbon Steel Plate?
Carbon steel plate in IS 2062 and ASTM A36 is low-carbon, weldable structural steel. IS 2062 grades are named by minimum yield strength (E250, E350 and higher), with sub-grades A, BR, B0 and C that set the Charpy impact test temperature. ASTM A36 is the common US structural grade with 250 MPa minimum yield. These plates are used for base plates, gussets, structural members, tanks not under pressure, chutes, hoppers and machine frames. For pressure vessels and boilers, boiler-quality plate to ASTM A516 or IS 2002 is specified instead.
Key features
- Stockist and supplier — sourced from integrated steel mills; Teshi does not manufacture plate
- IS 2062 E250 and E350 in sub-grades A, BR, B0 and C
- ASTM A36 / ASME SA-36 against order
- Mill test certificates with heat numbers and impact values where applicable
- Thickness and size per mill availability; other sizes supplied against order
- Can be ordered together with flanges, fittings and fabrications manufactured by Teshi
Specification
| Supply | Stockist & supplier — Teshi Group, India |
|---|---|
| Standards | IS 2062, ASTM A36 / ASME SA-36 |
| Grades | IS 2062 E250 (A, BR, B0, C), E350, E410, E450; ASTM A36, A283 Gr C, A285 Gr C, A572 Gr 50; EN 10025 S275JR, S355JR / J0 / J2 |
| Sizes | Thickness, width and length per mill programme; other sizes supplied against order |
| Condition | As rolled; normalised against order |
| Impact test | IS 2062 BR: room temperature; B0: 0 °C; C: −20 °C |
| Other plate grades stocked | Carbon / boiler: IS 2062 E250–E450, ASTM A36, A516 Gr 60 / 70, A537; Cr-Mo: ASTM A387 Gr 11, 12, 22, 91; stainless: ASTM A240 304 / 304L / 304H, 309S, 310S, 316 / 316L / 316H / 316Ti, 317L, 321 / 321H, 347 / 347H, 410, 430, 904L, 254 SMO; duplex S31803 / S32205; super duplex S32750 / S32760; nickel: Monel 400 (B127), Inconel 600 (B168), Inconel 625 (B443), Incoloy 800 / 800H / 800HT (B409), Incoloy 825 (B424), Hastelloy C276 / C22 (B575), Hastelloy B2 / B3 (B333), Alloy 20 (B463), Nickel 200 / 201 (B162); titanium Gr 1, 2, 5, 7, 12 (B265); Cu-Ni 90/10, 70/30 (B171) |
| Testing | Chemical, tensile, bend and impact tests per the standard |
| Documents | Mill test certificate to EN 10204 3.1; EN 10204 3.2 / third-party inspection when the order specifies |
Applications
- Structural steelwork and base plates
- Storage tanks and silos (non-pressure)
- Chutes, hoppers and liners
- Machine frames and fabrication
- Bridges and heavy structures
Mechanical properties
| Grade | Tensile, min (MPa) | Yield, min (MPa) | Elongation, min (%) |
|---|---|---|---|
| IS 2062 E250 | 410 | 250 | 23 |
| IS 2062 E350 | 490 | 350 | 22 |
| ASTM A36 | 400–550 | 250 | — |
IS 2062 yield minimums apply to the thinnest thickness band; lower minimums apply to thicker plate. ASTM A36 yield is 220 MPa for plate over 200 mm (8 in).
Technical data sheets
Dimensions & weights
Material grades
All gradesFAQ
Carbon Steel Plate: common questions
What is the difference between IS 2062 E250 and E350?
The number is the minimum yield strength in MPa. E250 has 250 MPa minimum yield and 410 MPa minimum tensile; E350 has 350 MPa minimum yield and 490 MPa minimum tensile, for lighter or higher-load designs.
What do A, BR, B0 and C mean in IS 2062?
They set the impact test. A has no impact test; BR is tested at room temperature; B0 at 0 °C; C at −20 °C. Chemistry and tensile requirements are the same within a grade.
Is ASTM A36 equivalent to IS 2062 E250?
They are close: both have 250 MPa minimum yield. The chemistry limits and test requirements differ, so substitution should be approved by the designer. Mill certificates show the actual values for comparison.
Can carbon steel plate be used for pressure vessels?
Structural plate is not normally used for pressure parts. Pressure vessels and boilers use ASTM A516 or IS 2002 boiler-quality plate. See our boiler quality plates page.
Need a size or grade not listed here?
We source against your specification from approved mills, with mill test certificates and inspection before dispatch.
Send us your specificationTraceability
From mill heat to your site
- 01
Approved mill material
Received against the mill certificate; heat number registered.
- 02
Forging & machining
Heat number carried through every stage in our Indian works.
- 03
PMI, dimensional & NDT
Every lot inspected to the governing standard; TPI witness on request.
- 04
Stamped & certified dispatch
Hard-stamped pieces with EN 10204 3.1 / 3.2 certificates.
Quick RFQ
Quote for Carbon Steel Plate in 24–48 hours
More steel plates
All steel platesBoiler Quality Plate
ASTM A516 · ASME SA-516
View productSteel PlatesSS 304 / 304L Plate
ASTM A240 · ASME SA-240
View productSteel PlatesSS 316 / 316L Plate
ASTM A240 · ASME SA-240
View productSteel PlatesSS 310S Plate
ASTM A240 · ASME SA-240
View productSteel PlatesSS 321 Plate
ASTM A240 · ASME SA-240
View productSteel PlatesSS 347 Plate
ASTM A240 · ASME SA-240
View product